after three years I finally got it.
1- turn the radio off (seems to be the key with all Pioneer radios when setting the clock)
2- press 'func' until the display lights back up
3- press 'func' again until the clock appears with the hour flashing
4- use the up and down buttons to select desired hour
5- press 'func' to set the hour
repeat steps 4&5 for the minutes
Turn off the radio/cd player by holding the source button.
Press in and hold the volume knob. After a few seconds, the initial setup menu will pop up. Turn the knob in either direction until you see CLOCK.
Press the directional volume button to the left and right to select hours or minutes, and press it up/down to adjust the time.
turn the radio off and push and hold the knob for about 5 seconds then u'll get to the menu where u can set it
Turn off and hold function down and set with direction key then again function down for store.
how do you set your clock on a pioneer deh-1900mp car radio
Press function button to display clock and change using arrows
watch allwrappedup123 on youtube.com
To set the clock on a DEN-p6400 car stereo the system has to first be turned off. After turning off the system, hold the 'function' key until the display shows, then set the time by moving the arrows either up or down.
Turn off the stereo then push the menu button on some models this is the volume dial, if yours pushes in, the it will ask you if you want to set the clock or any other options listed there.
With key on and stereo off hold both the clock and audio button clock reading will blink use up and down arrows to change hour then left and right to switch to minutes up and down to set press clock button again and done
turn off the unit first hit the clock button then hit the function button then it will flash then its ready for your input "use the arrows when its flashing to change the time".
With stereo OFF...Push and hold the round "D-Pad" for a few seconds, then use the up down left right controls to set time.
you press the settings tab
Q: "How do you set the clock on a Jensen CR220X car stereo?"I just did this today (after searching here to find out how, to no avail). I figured it out.A: With the stereo off, the clock is still on. Press and hold "display" while using the TUNER knob to set the clock. Clockwise is minutes, counterclockwise is hours.It might work with the stereo 'on' too, but I didn't do it that way.--scotthttp://www.pleasurizer.com/An automotive adventure log for the intrepid Korb brothersAnswerQ: "How do you set the clock on a Jensen CR220X car stereo?" I just did this today (after searching here to find out how, to no avail). I figured it out.A: With the stereo off, the clock is still on. Press and hold "display" while using the TUNER knob to set the clock. Clockwise is minutes, counterclockwise is hours.It might work with the stereo 'on' too, but I didn't do it that way.--scotthttp://www.pleasurizer.com/An automotive adventure log for the intrepid Korb brothersAnswerQ: "How do you set the clock on a Jensen CR220X car stereo?" I just did this today (after searching here to find out how, to no avail). I figured it out.A: With the stereo off, the clock is still on. Press and hold "display" while using the TUNER knob to set the clock. Clockwise is minutes, counterclockwise is hours.It might work with the stereo 'on' too, but I didn't do it that way.--scotthttp://www.pleasurizer.com/An automotive adventure log for the intrepid Korb brothers
press and hold source then function. Clock will blinking then you can set.
While stereo is on hold down source button till unit turns off, then release. Then hold function button until clock shows the hour will be blinking, use your four way directional keypad to set, then press your source key once and you are done