To set the clock on a 2002 Chevy cavalier you must press and hold one of the arrow keys located near the clock. You will hear a "beep" this is letting you know that your car is ready to set the clock. Quickly after you hear this beep, press the arrow buttons up and down and that changes the time. Leave it alone after the time is set and it will set itself permently until you change it again!! Very easy!
Depending on the set up. The hour/ min buttons are located on the lower right corner buttons if it is a CD player. Hold the buttons down to set the time. If you Cavalier has a set button, hold it down and while the set light is on use the seek and scan buttons to set the clock. If your 2002 Chevy Cavalier does not have a "set button" like mine, then hold down the "up/down" arrows located in the right corner for a few seconds and the time will change. down/hours up/minutes.
turn radio off n use radio knobs to set the clock
AnswerTurn the radio off first. Press the set button. Use the scan and seek buttons to set the hour and minute.
In the lower right corner of the sterio are two buttons. Under them are the words HOURS MINS.. Hold them down one at a time and it will change the time so you can set it.
show me the radio in a 2002 Chevy mabliu l s or show me how to set the clock on the radio
see owner's manual
how do you set the clock on a 2003 chevrolet trailblazer
How set clock in bmw 2002 325xI
There is a Up and Down Arrows becide the audio button, Press the arrows for about 3 seconds it will beep, It will change the Hour and Min.
Underneath the tuner knob, there are two small black buttons. One says HR and the other says MIN. Hold down the HR button and the clock will beep and you can change the hour but pushing the HR button and then change the MIN as well. When you're done, leave it alone and it will be set. To set the clock on a 2002 Chevy cavalier with a factory CD player you must first have the key turned either in the accesories position of turned forward twice. Then press and hole hr and min for 3 seconds and release. Then to set the hour press and hold hour until it is set to the correct hour. Same goes for the minutes, just press until the correct minutes is shown. That is all. Simple ain't it.
Press the set button and use the seek and scan buttons to change the hours and minutes.