You can set the clock, on your 2005 Dodge ram, by holding in the volume button. Turning the tuning knob as the volume button is held in. The time will advance with the tuning knob.
how do i set the clock in a 2005 saturn vue
If it's like my 96 neon there are two small holes just to the right of the clock with H (hours) and M (minutes) next to them. Use a pen tip and push the button in the hole and the clock will set. Hope this helps. DJ
How do I set the time?
You have to repair the malfunction that is setting the code that has put the computer in limp mode.
To change the clock on your 2005 dodge Magnum you need to turn off the radio and hold the button that has clock set on it until the time flashes then you turn the tuner knob that's on the right clockwise to go increase time and counterclockwise to bring numbers down. Good luck.
how to set the timing marks on a single cam dodge neon
Use the set buttons.
On the front of the radio to the right there are 2 small black rubber looking dots. Take a pen and use the tip to press in and you will then be able to adjust the clock. One is for hours and the other for minutes.
When you look at the radio to the right there are 2 small black rubber looking dots. Take a pin and use the tip to press in and you will then be able to adjust the clock. If you don't look at the clock closely you really don't notice them.
Just get to the station you want to set, then PRESS AND HOLD the button for about two seconds. I think it gives a quick beep when it's set, but not positive. It's that easy.
The 2005 Jeep Liberty clock can be set by holding in the volume button. With the volume button held in the clock will flash. While the clock is flashing turn the tuning knob to adjust the time.
My 2000 Dodge Durango , my clock does not have the h or the m for setting the clock! any suggestions on how to set the clock????? Turn radio on, press set, press sel, now seek should change time.
change radio time in 2005 yukon
look in your owners manual.
The clock on the radio can be set by two buttons found to the right on the display screen. H for hour and M for minute.
The first thing you need to do is purchase an owners manual, which you will need to know the maintenance schedule. Salvage yard, dealer, Ebay, and many on-line sites are sources. Someone else may be able to tell you how to set the clock.
Check your user manual. If you don't have one, look for the Hour/Minute button or buttons located near the clock. You should only have to press the buttons to adjust the time. A 2000 Neon has them on the clock and requires a pen to change them.
daytime running lights are set with diagnosic scan tool in the cluster because a neon doesn't have a body computer. some neons have the custumer preferance for this some don't. cars built in Canada definitly have it.
get the pullys lined up at the timing marks
You must disconnect the battery and reconnect it at the time it says on your clock.
Read your owner's manual. This information can be found there.
It should automatically set when vehicle is outside.
Push the set button and within 10 seconds press the seek and scan buttons.