Pull the left nob and turn it left for the hour change or right for the minutes. there are 2 nobs on the dash... it's the one beneath the clock... that changes luminosity
An atomic clock should set itself once it receives the calibration signal .
To reset the mpg, and timer. You need to press and hold both buttons for about 5 to 6 secs.
Not sure what you're needing to do. But to set up the clock and the outdoor temperature sensor, make sure the batteries are new for both. Put the batteries in the outdoor sensor first. Wait to see the temperature reading on the sensor. Then put the batteries in the clock. In about 15 minutes the outdoor temperature should show on the clock. Do not set the clock until the outdoor temperature is displayed. You can set the clock manually, or set the button on the back to atomic so that it will automatically receive the time.
the time was 10:10
False
Pull the left nob and turn it left for the hour change or right for the minutes. there are 2 nobs on the dash... it's the one beneath the clock... that changes luminosity
hold set button then hit scan for mins. and seek for hour. then hit set
Push the set button and with the set light on, press either the scan or seek buttons to change the hours and minutes. GoodluckJoe
Borrowed from silverado answer: Push the set button and with the set light on, press either the scan or seek buttons to change...
The clock is set at 4:10 on the back of the $100 bill. The time can be noticed with the help of a 20-fold magnification.
with key in the "acc" position hit the "set" button and then hit the "scan" button for hours and the "seek" button for minutes
to set the time on a3,pull the stick next to clock,it will now flash,turn right to add hour and left so forth.little pressure is needed so don,t force.
This is well detailed and illustrated in the Owners Manual - See "Related Questions" below for more
Has the car got the on board computer with the screen and the clock on the right of the screen? If so I'm pretty sure you hold down the clock button and use the 1000, 100, 10, 1 buttons to set it. Ignition might need to be on.
the clock is set for time
There's 2 small knobs in the instrument cluster. The right knob controls the trip odometer the left knob is for the clock and speed alarm. PULL the left knob out and turn it to the right or left to set the clock.
'how do I set the clock on a 2001 mercury mountaineer'