On the left hand side of the face of the radio there are 2 counter sunk buttons, one above the other. One's for the hour and the other for the minute. Use something like a ballpoint pen to depress the buttons to change the hour or minute.
Bud.
Idle speed is not adjustable on this car.
On some Chrysler radios there are two round holes on the display panel of the radio with a letter h and m for hours and minutes. just take pen point and push into these holes to set the time.
There is no set interval. It only needs replaced if there is a failure.
Idle is computer controlled and is not adjustable. If the speed is incorrect there is a sensor or actuator malfunction.
When it is on the computer has detected a malfunction and set a trouble code.
The marks on the sprockets line up with plated links on the chain.
If you are asking about ignition timing there is no adjustment it is controlled by the engine controller
remove left tire and fender cover set in front of tire
The engine light stays on when the engine computer has detected an emissions related failure and set a code.
The engine computer has detected a malfunction and set a code for the electronic throttle system.
The computer will set idle between 600 and 900 rpm depending on load and temperature..
u need to use a volt meter and set t.p.sensor and adjust the cable unless u can flash comp.