Want this question answered?
.075 = 3/40 as a fraction in its simplest form
No.
75m = 2952.73391 inches
Well all you put is 075 so that Ina fraction would be 75/100 but I think you meant toputwhich wouldbe 75/1000
Without a decimal, there is no difference.
It would be a full grid(100 all shaded) and six more on another hundred-grid.
Draw a 10x10 grid and shade in 57 of the cells in the grid.
That depends upon how many grid squares you have in total and the largest value you have to represent. Wherever possible, you should arrange that each square that you have to shade represents either a divisor or a simple fraction of all the values you have to represent. With 0.49 ml as one of the values, it is unlikely that the values you will have to represent are all multiples of 0.49 ml; nor are they all likely to be multiples of 0.07 ml. So unless you use 1 grid square to represent 0.01 ml you are going to have to shade a fraction of a grid square. Once you have chosen how much each grid square will represent, or have been given the value to use, divide the 0.49 by this value to find out how many grid square to shade: If each grid square represents 0.01 ml, shade 0.49 ÷ 0.01 = 49 of them If each grid square represents 0.02 ml, shade 0.49 ÷ 0.02 = 24 1/2 of them If each grid square represents 0.04 ml, shade 0.49 ÷ 0.04 = 12 1/4 of them If each grid square represents 0.05 ml, shade 0.49 ÷ 0.05 = 9 4/5 of them If each grid square represents 0.10 ml, shade 0.49 ÷ 0.10 = 4 9/10 of them etc.
125 is more than 075, so 125 mg is more than 075 mg.
i think its $ 0.075
.075 = 3/40 as a fraction in its simplest form
Is 0.15 percent more than .075 percent?
If 075 mcg is 0,075 microgram and the liquid is water the voume is 0,075 microlitres.
You could make each box on the grid be 0.1 wide and 0.1 tall. Then shade over 7 boxes to the left and 4 boxes up. Then when you count the boxes you will have the answer, which will be 28 boxes, which are 0.1 by 0.1, so 0.7*0.4=0.28.
There are three varieties of pentagrids. Initial type - 6A7 type (converter). Grid 1 - oscillator grid, Grid 2 - oscillator anode, Grid 3 - screen grid, Grid 4 - signal grid, Grid 5 - screen grid. Development - 6SA7/1R5 type (converter). Grid 1 - oscillator grid, Grid 2 - screen grid, Grid 3 - signal grid, Grid 4 - screen grid, Grid 5 - suppressor grid. Development - 6L7 (mixer). Grid 1 - signal grid, Grid 2 - screen grid, Grid 3 - oscillator injection grid, Grid 4 - screen grid, Grid 5 - suppressor grid.
.075
No.