The fan belt is fit onto a Mercedes Vito by loosening the alternator bracket and allowing it to move downward. The belt can then be slipped over the remaining pulleys and then back over the alternator.
fit a socket to the nut on the tensioner and turn it anti clock wise.slip the drive belt of. put the new belt in place . turn the nut anticlock wise an d fit new belt
Start by taking old one off first, noting direction, and what pulleys it goes round first, then slacken the tensioner. Then re-fitting is reversal of removal.
Hi Just above the Alternator is a long threaded bar with a nut on the end. this is the tension adjuster. slacken the nut off until the belt is loose enough to take off. replace the belt, tighten the nut back up until the belt gets to the same tension and you are away to go :D Hope this helps
There is no fan belt it is an electric fan. Are you referring to the serpentine belt?
The Villager has an electric fan and does not use a "fan belt".
A serpentine belt is one belt that runs all engine accessories (i.e. power steering pump, ac compressor, water pump, AND fan). A fan belt runs the fan only.
fan belt needs tightened
There is no fan belt, they have electric fans.
how do you change a fan belt on a 406
how do you tighten fan belt on l200
NO, It has a Serpentine belt that drives all accessories but not the fan. The fan is driven by an electric motor and has no belt.