0
remove the ignition tumbler from column and crank it with a insulated handle flatblade screwdriver if the ignition is located in the dash remove key tumbler by inserting a small pin in the hole located above the key hole and it will pop out using a screwdriver and turn it over that way
What else can I help you with?
When did Chevy pickup start having electronics on them?
1975 for the HEI (High Energy Ignition) system (no more ignition points)
How can you start a 1989 mercury cougar with a broken ignition switch?
how can you start a '89 mercury cougar with a broken ignition switch?
Why does your Chevy pickup grind when you start it?
check the oil
What year did the Chevy Colorado pickup start?
2007
How do you start a Chevy Caprice?
By turning the ignition key...
Why will your 1998 Chevy 1500 pickup not start when it is wet outside?
Coil
85 Chevy C10 cranks but wont start theres power going into the distributor no power coming out you replaced the pickup coil ignition coil the soleniod still wont start?
replace module, rotor button and dist. cap
Will a broken serpentine belt keep your 1985 Chevy S10 pickup from starting?
not really but would not suggest starting it because of over heating issues and as long as the battery is charged it should start
Chevy pickup will not start durning winter season?
Replace the engine coolant sensor.
Why does your 2000 F250 start without the key?
The ignition lock seems to be broken.
Does anyone have a wiring diagram for the ignition switch on a 1958 Chevy Pickup which has the start built into the ignition switch as opposed to a separate starter button which it previously had?
I hav just purchased a 58 Chevy apache and are having the same problem. I did find a site that displays a complete diagraham for the entire ststem includingthe ignition switch. The site is http://www.classicchevytrucks.20m.com/cgi-binwiring.jpg Good luck with the changeover wspringerjr@yahoo.com
89 Chevy pickup with a 5.0 liter. truck will not start. plugs have no fire to them but the coil is producing fire. what could be the problem?
possibly the wire from the coil to the cap, or a cracked distrib. cap, or a worn rotor, have you checked your ignition module?
