Use the link to Sentry if your remote manual isn't handy.
precesion tv
In the instrustructions In the instrustructions
ilo is made by sansui and the tv remote codes are 135 OR 136
It nay not be possible. The Sentry may not have the DirecTV codes stored in it. You'd probably be better off trying to get the Direct remote set up to take its place.
Here is a list of the codes for the magnavox 021, 022, 062, 063, 104, 108, 124
Switches, used mainly for situations such as sentry devices or outside lights. The generation of electricity by the photovoltaic cell when light is present.
I used 067 for a Jumbo Universal Remote...you could try that.
Not a switch, but you could have a problem with the Sentry Key System. The key has a chip in it that communicates with a receiver near the ignition switch. You will have to go to a dealer for service.
The possessive form of the noun sentry is sentry's.Example: After many hours, the sentry's feet were aching.
The instructions on in the book that came with the van. Customer Key Programming You can program new sentry keys to the system if you have two valid sentry keys by performing the following procedure: 1. Cut the additional Sentry Key Transponder blank(s) to match the ignition switch lock cylinder key code. 2. Insert the first valid key into the ignition switch and turn the ignition switch ON for at least 3 seconds but no longer than 15 seconds. Turn the ignition switch OFF and remove the first key. 3. Insert the second valid key and turn the ignition switch ON within 15 seconds. After ten seconds a chime will sound and the Theft Alarm Light will begin to flash. Turn the ignition switch OFF and remove the second key.
Sentry Group was created in 1930.