0
dude, i just tried this myself on a 1993 4cyl. Camry and went by all the step the repair manual says to do. seriously take my advice and just let a mechanic shop do it for you. if you do it yourself and try to get the bolt off the pulley, your going to just make the timing belt skip around in there and mess up the timing of the engine. i had the intake cam held down with a wrench like instructed to while trying to loosen the bolt on the pulley. that is when the gear just jumped the timing belt inside. You'll have to do so much more harder of stuff to get the whole engine in time again. its a hard fix because the bolt is lock-tighted down Alot! I'm having a mechanic come to my house today to fix the whole shabang and its gonna prob be a huge shabang on my wallet since i tried to do it myself! just having a mechanic do it for you shouldn't be over 200$ id imagine. I'd pay it in a heart beat! hope this helped!
-----------
DO NOT attempt to loosen the harmonic balancer bolt by holding the camshaft. You will destroy the timing belt. You have to lock the flywheel with a pry bar or heavy screwdriver then loosen the harmonic balancer bolt.
By now your fan belts should be off then get out your harmonic balance puller. DO NOT use a three jaw puller as you will destroy the harmonic balancer.
You can rent a harmonic balancer puller at many auto parts stores or they are fairly inexpensive to buy.
What else can I help you with?
How do you change harmonic balancer on 1991 buick lesabre?
The flywheel has to be held in place by a holding tool, Remove the mounting bolt, then use a balancer remover to pull the harmonic balancer.
Will a 1991 Toyota Camry transmission fit in a 1992 Toyota Camry?
Will a1992 toyota camru transmission fif in a 1994 toyota
Where is the crank sensor on 1991 olds cutlass ciera?
the crank sensor is behind the harmonic balancer
Where is the crank sensor located on a 1991 Buick Park Avenue?
It's just behind the harmonic balancer.
Timming marks for 190se 1991 6cyl?
Timimg marks are on the harmonic balancer and pointer is on the lower timing cover
Where is the crank sensor in a 1991 Cutlass Supreme?
Behind the harmonic balancer (dampner) that is located behind the crankshaft pulley.
Is a Audi s3 faster than a Toyota Camry gti?
an s3 is really slow i raced it in my Toyota Camry gti 1991 and i won Toyota Camry gti is really really fast
My 1991 dodge stealth twin turbo its leaking water from around the harmonic balancer?
more than likely it is leaking out of the weep hole located at the bottom of the water pump and is running down to the harmonic balancer,if so your water pump is on its way out
Where are the timing marks on a 3.1 1991 Chevy Beretta?
On a 1991 Chevy Beretta with a 3.1L engine, the timing marks are located on the harmonic balancer and the timing cover. The harmonic balancer has a series of notches, while the timing cover has a pointer that indicates the correct timing. To set the timing, align the mark on the harmonic balancer with the pointer on the timing cover at the specified timing degrees. Always refer to the vehicle's service manual for specific timing specifications and procedures.
How many motor mounts are on a 1991 Toyota Camry and where are they?
5
1991 Toyota Camry vibrate?
If your 1991 Toyota Camry is vibrating, the tires might be wearing unevenly. This could be due to parts that are worn in the front end or even from tires that are damaged.
What is the torque specification for Toyota Camry 1989 four cylinder head bolts?
1991 toyota camry head bolts torque specs
