0
theres a little clip that needs to be pushed out from behind the crank, push the door panel back and you should be able to see it, theres a few ways to get it off, one you can go buy some fancy tool or it you can get a small screwdriver back there push it off the crank but dont lose it and make sure to put it back on afterwards
Wiki User
∙ 18y ago
Add your answer:
Earn +20 pts
How do you take of window crank on 95 dodge stratus?
Loosen the set screw.
How do you take off a window handle on a 1997 Chevy S-10?
Window cranks are easy to remove. Go to the local auto parts store, and ask for a window crank removal too. Slip it in behind the crank until it comes free.
How do you take off a window crank?
It depends on the year and make vehicle. Need to know what vehicle you have to answer that question.
How do you take a window crank off and put on a 1994 Nissan Sentra XE?
push in on the door panel. use a small flat head screw driver push the clip of the crank an then pull the crank off
How do you install a side rear window on a 1970 Chevy Nova?
I think you have to take out the back seat first, but, then that panel, with the window crank, (or where it would be, if you have a post model) comes out, exposing all the gear.
How do you fix a Window that fell in the door of 1998 dodge ram 1500?
Open the door-stand between the door and the van-look at the armrest there are two Philips screws underneath-unscrew those. The door handle where you open the door! Open and hold it open-there is a 7/16 bolt-unscrew that. The window crank! There is a little cover take a real thin knife and pop that off-there's a Philips screw in the middle of the window crank- unscrew that and remove the window crank. Take a flat blade putty knife between the metal door and the interior door panel-Pop them off and the door panel will come off. Pull the plastic cover off-put the window crank back on and you should see from the there what needs to be done. If you need to take the other door apart and see how it works-it's really pretty simple. Richard p
How is the window crank handle removed on a '85 NISSAN pickup?
Push in slightly on the door panel around the window crank area. Take a small hook shaped tool (can be made from a coat hanger) and pull out the C shaped clip that pins the handle to the shaft. Pull handle off shaft.
I have a aftermarket window crank on my 97 s10 and i cant find out how to take off the crank. I dont know what make of crank it is but its not stock.?
There's a clip holding it on. It's between the door panel and the crank. You have to use a flathead screwdriver and slip it between the door panel and crank to push it off. Try to push the panel in towards the door so you can see it.
How do you get the window crank off on a 1994 metro?
Take a rag and gently work it in behind the crank and move it from side to side while pulling up on it. This should release the catch spring and from there you can insert a small screwdriver and pull it out.
How do you remove the window crank on a 1999 Ford Escort ZX2 so you can take the interior panel of the door off?
Go to autozone, carquest, etc and buy a tool specifically designed to remove the crank. costs a few dollars
How do you take off window crank 1985 olds?
There should be a lock pin on the back shaft of the handle ,should be able to pop it out with a small screw driver.
How do you take off a manual window crank from a 1998 gmc sonoma?
Your local auto parts store can sell you an inexpensive tool (under $10) that will do the job.
