0
What else can I help you with?
Repair for 1986 Mazda b2000 blown head gasket?
change the head gasket. tard
How can you tell if head gasket is blown on my Mazda b2000?
antifreeze in the oil should be a milkshake color
What is the cost to replace the head gasket on a Mazda MPV?
What is the cost to replace the head gasket on a Mazda MPV?
How do you replace the head gasket located on a 1989 Mazda B2200 1.3L?
replace head gasket
What all should you check if water gets in your oil in a 1987 Mazda b2000?
The most likely cause is a blown head gasket.
Where is the Ignition Module located on 1986 Mazda B2000?
Inside the distriburator after you remove the rotor button.
Where is the water pump located on a 1986 Mazda b2000 pickup?
It is behind the timing case cover behind the crankshaft pulley.You have to remove the timing belt to replace the water pump for this repair.
Which Mazda cars can you flat tow?
mazda b2000
What is the engine oil capacity for an 1986 Mazda B2000?
The engine oil capacity for a 1986 Mazda B2000 is 4.1 quarts.
How to Replace manifold gasket 87 Mazda B2200?
intake? carb or injected (b2000,b2200 or b2600i) b2000 and b2200 pull the air cleaner and hoses ( watch were the vacuum lines go and unhook the little white 2 wire plug on the front) remove the fuel lines from the fuel pump ( on the pass. back of the head) remove the top and bottom manifold nuts. remove the throttle cable ( try not to loose the spot were it is on the shaft. you might be able to wiggle it out of the holder) you can use a long extension to get to the under side nuts and pull the bypass tube back out of the way. pull the manifold back and clean all of the old gasket off . clean the head and put new gasket in DRY (do not use silicone or gasket compound)
What carburetor is on a 1986 Mazda b2000?
I believe the carburetor is a Mikuni. I have a 1986 B2000 myself.
Is Mazda b2000 pickup truck fuel injected?
No, it is carburated. If you remove the air cleaner cover it will have a opening with a flap inside it.
