Usually to remove the front bumper grill you would just locate the screws or bolts holding the part in place and then remove them. The grill should be able to be removed after that.
Yes NO they have 2 types of sport packages--multi pc. STEEL front bumper and a 1 pc. PLASTIC front bumper--the grill fot this bumper is larger and will not fit the steel bumper.
yes, but you will have to have both the bumper and the sport grill and of course the sport bumper brackets. Other than that though, its a direct bolt-on
There should be 3 air bag sensors in the front. One:Behind the bumper or about six inches above it(passenger side). Two:Below the Mitsubishi "3 Diamond" Logo(inside the grill, in front of the radiator). Three:Behind the bumper or about six inches above it(driver side)
No, it will not, unless you have the mounting brackets for the sport bumper and a welding rig to weld it to your frame or you can drill new mounting holes in your frame to match. went the other way sport to non sport in order to place a bumper on my truck temporarily until I can find a reasonably priced sport bumper or after market off road bumper. hope this helps.
how to change front bumper in 1996 Suzuki sidekick sport
under the front bumper on the passenger side
It should be on the front bumper under the front fascia. 1ts the 17th number'
With most winch kits, yes.
It would have it marked on the front bumper if not you could tell from the manual.
It is near the right front headlight. You have to remove the grill to access.
You have to remove the front bumper to gain access to sensors.
On a Mitsubishi Montero Sport, the front bottle, or tank, for the windshield washer fluid is right behind the passenger headlight in the engine. It is just inside the passenger front bumper.