Unscrew the metal part and take a pair if tweezers and remove the center very carefully. And the keep the center in a Ziploc baggie and put in a place where it won't get broken
filament
You wouldn't use a potato to screw in a light bulb... if the glass in the light bulb breaks as you're removing it, you can use a potato to take the light bulb out.
To dispose of a fluorescent light bulb properly, take it to a recycling center or a hazardous waste facility. Do not throw it in the regular trash because it contains mercury, which can be harmful to the environment.
Define "light bulb"
take out light bulb in a dash
Bulb burnd out replace
One professional will take 1 second to screw in a light bulb and 0.5 seconds to install a bayonet cap light bulb.
that depends on how high up the light bulb is
It should only take one person to switch on a light bulb if it is 6 light bulbs it may take 6 people to switch on a light bulb Der!
You have to take the whole light out, there is two screws to take out, then the light will pull out. Then change the bulb. Greeny
Remove the light bulb connector from the light. Take hold of the light bulb, push in and turn at the same time. The light bulb will come out. Reverse the process to install the new light bulb.
Pop the cover off by pulling at the corners away from the window, pull the tabs on the light shield, and replace the bulb with a 912 light bulb.