the plastic cover over the head light has a bunch of plastic retaining clips which must be removed by pulling the center up then there is two torx bolts which hold the head light on
I just had to change out the front blinker bulb on my 97 sunfire gt, and as far as I know, there were no huge revisions between the 97 and 98 model year, so here's what you'll need to do. First of all, take out the headlight above the blinker. Your manual should tell you how to do this. Then, simply reach through the hole you've just created to losen the nuts holding the light bulb casing in place, pull it out, and change the bulb. Simple!
what you do is you open the hood and right above the headlight is a black plastic cover held on by little plastic clips. take that off and you'll see two bid bolts connected to the frame of the headlight. take them off, jiggle the headlight alittle, and it should come right out
on the 2.4 its to the left of the starter above the oil filter
just above the oil filter
In a 2003 Ion Sedan, you...: * Pop the hood * Above each headlight are 2 L shaped pins. Turn, and then pull them directly up to remove them. * Pull the headlight housing straight out. * Turn the bulb housing for the blinker to unlock it and remove the bulb.
You might need to refill your blinker fluid. If that does not work, check above the passengers visor..
Usually right above and in line with the crankshaft pulley
under dash drivers side mounted above the brake pedal
Depends on mileage, options, and above all condition of the vehicle. Click the link for the value.
There are small holes in the plastic housing just above the headlight with the hood open. You need to use a torx head screw driver. Insert torx head screwdriver and turn either direction for up or down. And the other hole is for left or right adjustments.
sitting in car drivers seat it is located above left foot on firewall
If its anything like my 96 it should have a levar above the mear push the botton and pull it towards the rear