Be the first to answer!
SRS light indicates airbag fault, if this is showing then you should get your car checked.
If you have to ask, take it to a garage.
Does your rover 214 have a k series engine if it does it could be a problem with your head gasket
An alternator for a Rover 214 can be ordered from the dealer or from a local auto parts store. In addition, an alternator can be found at a junk yard.
the rover model is early rover 200 series ie, 214, 216.
if the engine is running and the red srs light is on. it indicates that the airbag/bags are not working correctly. if the light is on then goes out when the ignition is on. they are functioning correctly
Take to garage. Give nice man £300. Collect in 2 days.
my rover 214 sli is very hard to start from cold once its going its no problem i took the filter cover off poured a little petrol into the carb and away she goes?
got a tape measure??????????????????
To change a power steering belt on a Rover 214, unbolt the power steering pump and pry the belt off the pulley. Replace with another steering belt and reinstall the steering pump.
the crankshaft sensor lokited ner the flaywil bihind the transmisin
its near the battery and it is a black box with 2 wiring plugs underneath it.
Located at the rear of the waterpump, under the inlet manifold
I had this problem. I solved it taking the car to my local scrap dealer and buying a bus pass with the £30 he give me
it means there is a fault with your airbag system,
check out wiringdiagrams21.com for arover 214 itis 4 or 17
try the left hand side under the bonnet at the front
Code 214 engine speed (RPM) sensor Intermittant signal
For the 214 i removed the whole airfilter box... disconnected the switch..Just incase anyone wondered.. its right below the air filter box.. ontop of the gear boxthe 214 reverse switch is 22mm hex size.
1 is ok/next and use scan to change number
Behind a plastic panel below and to the right of the steering wheel and above the accelerator pedal.
MOST LIKLY YOUR THERMOSTAT NEEDS CHANGING.
Just really want to know the timing belt settings please?