How do you take the door panels off to access the power lock modules on a 1995 Jeep Grand Cherokee 4.0L?

Answer 1

The question you ask is too involved for a proper answer. You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library

i just covered this in a similar post about replacing the window regulator on an '02 Cherokee

1) Phillips head==unscrew the 2 screws holding the plastic door cover to the metal door (1 screw behind the door handle, 1 screw behind the door grip, both within 1 foot of each other)

2) using a flat head screw driver, wedge the plastic door cover away from the metal door frame. shimmy the screw driver back & forth, slowly, to slowly pop out the plastic clips holding the plastic door cover from the small holes in the metal door frame. work your way around the entire plastic cover doing this. there should be about 10-15 of them total.

*don't worry if you break one or two, but if you break 4 or more--depending on position--you need to replace them. local auto parts stores sell packs for $3

3) pull out the plastic door cover a few inches, and disconnect the electrical connectors from the Window Control panel, also disconnect the 2 metal rods (one is power lock, other is door handle)

done!

should be able to be done in about 10 minutes.