U pull the arm all the way OUT or up (what ever)(the travel away from the windshield & @ the bottom where the anm connects there is a small lever on the side where it connects-JUST pull the little Lever out - maybe a 1/4 inch-DON"T FORCE IT-after the lever is out-The arm will lift right off.
It is attached to the wiper motor.
Replace wiper blade and carefully bend wiper arm so it makes good contact with windshield
There are screws on the base of the wiper (beneath black caps) loosen them, reposition the wiper then tighten the screw.
You must remove the arm of the wiper and move it down
You have to pop the wiper arm off(there should be a blot some cars differ) and adjust it where you would like it.
It's possible that it has something to do with the rear windshield wiper fluid dispenser. You don't describe it very well but that may be it.
How do I replace the windshield wiper switch?
Your windshield AND wiper blades a good cleaning. if the blades are a few years old, replace them.
It's located on the signal indicator. Turn the knob up for the windshield wipers to come on.
There was an inventor (of the windshield wiper) called Mary Anderson.There was an inventor (of the windshield wiper) called Mary Anderson.There was an inventor (of the windshield wiper) called Mary Anderson.There was an inventor (of the windshield wiper) called Mary Anderson.
Replace the locking tab on top of the wiper
Remove the windshield wiper arm from the windshield wiper motor. Remove the wiring harness. Remove the retaining nut. Reverse the process to install the new windshield wiper motor.