how to find out if your axels are bent lift the vehicle off the ground ,,,now try too spinn the tire.....if you get a grinding noise you might have no berrings
Take the vehicle to a qualified alignment shop, they will be able to tell you if your control arm is bent.
Jack it up and spin it.
Which ever one you think may be bent, Just take it out and roll it on a flat surface. If it is bent bad you will have a engine miss on that cylinder.
No. The most common way to tell if a frame is bent is if the roof is buckled.
Take it to an alignment shop.
Do a compression test.
Any decent alignment shop or place that sells and installs tires can remove the wheel, remove the tire, and check the wheel to see if it is bent. If it is bent very badly, just jacking up that wheel and spinning it by hand, you can see that it is bent.
If it has been removed, you could try placing it flat on a known perfectly flat surface. If it is bent you will be able to rock it slightly. Otherwise, any machine shop could check it and tell you, likely for free.
Just ask them
Most likely you have a tire out of balance. It can also be a bent or loose wheel. Have the tires rotated and balanced. They will tell you if a wheel is bent.
You can tell the age of the layers. The bottom layer is the oldest and the top is the youngest. When the layers are disturbed they tend to get bent and messed up and you cannot tell the age
"It is bent" "It was bent" "It will be bent"