Want this question answered?
When it is installed with the correct software, it allows a computer to connect to a network.
You likely need to reset the cable modem in order for the modem to locate the physical address of your new Ethernet card. Make sure the Ethernet cable is properly connected to both the modem (or your router) and the Ethernet card at the back of the computer. Following tihs you may also want to restart your computer. You also need to make sure the driver is installed for the ethernet card. It should be located on OS or ethernet disk.
You don't - you'll need an Ethernet card for your computer. A regular voice/fax modem is different than a high-speed/network connection, so you need a different 'card' (with a socket that will match your cable). If you can't find a socket that your Ethernet cable fits, then you don't have an Ethernet card installed!
the ethernet adapter driver is not installed
The Samsung Galaxy 2 tab is equipped with an ethernet card.
If your computer will not let you connect to the Internet via an Ethernet cable double check that the ethernet drivers have been installed. If the drivers are installed, try uninstalling and reinstalling them to see if that will correct the issue.
no
Ethernet Network Card
You would need the ethernet card can handle gigabit network traffic cable.
It is a network interface card. The purpose of this card is that it allows your computer to connect to the internet with the use of the ethernet cable.
ethernet controller is the device which deals with lan card means local area connection
INPUT