While the engine is not running you measure the 'rocker gap' between rod and rocker with a 'feeler gauge' . Each engine has specs for this gap, and if it's too wide that's the noisy one.
Take off one of the valve covers, if the rocker has a roller tip on the side which it touches the valve spring then its a roller, if no roller tip is present then its a normal tappet rocker.
rocker is the movement of the board. its how the board rocks from tip to tail
Valve Adjustment Procedure For 1986 Ford 177 CID (2.9L) V6 Engine To adjust the hydraulic lifters on this engine, position the cam so the tappet being adjusted is in the base circle area. Loosen the adjusting screw until a distinct lash between the rocker arm tip and the valve tip is evident. Carefully turn the adjustment screw until the rocker tip just touches the valve tip. Turn the adjusting screw in an additional 1.5 turns.
If you place the mouse over an icon, it will tell you what it is. This is a tool tip.
I wouldn't. Tell the waiter you appreciate his service but that you do not agree with him not getting the tip. If the owner is there, I would tell him in front of the waiter.
because you tip them on there back an see if there is anything there
Here's a tip. I can't tell you what good Pokemon there are on there because my DS is broken. But! The tip is, get large Pokemon.
== == ejeculation is when the sperm comes out of the tip of your penis. you can see it after an orgasm.
you can tell when a pointe shoe is dead is when the tip starts to rip, and the bottom starts to turn really black!!
You can fill out a roommate form where you tell what you're like and what bothers you.
The tip of the shoelace is the aglet. I had to press add to the dictionary so it didn't have that red squiggly line! Or you can watch the episode tip of the day in Phennis and Ferb they tell you.
i have no idea its a soc. extra point ques. so if somone knowes feel free to tell thankss