Want this question answered?
Only the front lights stay on for safety. You need to turn on your lights to get the back lights to come on. To turn off the front safety lights just push your emergency brake on one click.
Not as front signals.
fix airbag fault & serv light will go out
Turn the lights on with the main switch - either side lights or driving lights are fine.With your hand/fingers stil on the main switch pull it gently back, the first notch/click is front fog lights only the 2nd notch/click is front and rear fog lights.
It needs to have a separate switch for the front and rear lights.
turn on front lights and focus on road!
1st move the light switch to the desired position. 2nd PULL the switch gentle towards you. There are two positions for this switch. The first position or click, will turn on your front running lights. The second position or click will turn on both your front running lights and additional lights in the rear. You will be able to tell that you have activated them by the icons on your dash that will inform you they are on. To turn off simply push the switch back in. (Actually, those are the FOG lights, front and rear.)
There is a faulty ground wire in one of your tail lights or front parking/clearance lights.
turn the off button.
On an average car, there are high and low beam lights for night driving, clearance lights on the front and back, front and rear turn signals, and back-up lights used when backing up.
Turn your headlight switch to turn on your low beam headlights and pull the switch towards you to turn on the fog lights
Where headlights controls are pull it out once for front fog lights and again for front and back fog lights hope this helps