You unplug it.
What type of connection do you have? If you have a dialup connection it will stop your phones from working because your modem is actively using the phone lines at that time. If you are using A DSL modem it could be that there is so much dsl traffic on the line that your phones cannot operate correctly. In this case a simple DSL line filter can do wonders.
Turn off modemTurn off routerTurn on modem, wait for indication that the modem is onlineTurn on router, wait for indication that router has an internet connectionMay need to go into CMD and release\renew the IP address for computers connected to the router.
There are seven steps to connect a DSL router to a modem. Step 1: Turn off the modem. Disconnect the modem from your computer. Step 2: Plug in the ethernet cable to the back of your computer. Then plug the other end into the internet port on the Linkskys wireless router. Step 3: Plus a second ethernet cables into a numbered port on the Linkskys wireless router. Step 4: Turn on your modem, connect the power adapter to the Linkskys router and let it power on. Turn on the computer, open a browser window and type 192.168.1.1 into the address bar and hit enter. Step 5: Under the setup tab select basic setup. Select the type of DSL you are using Step 6: Type in your username and password Step 7: Open new browser and test connection.
Turn off or unplug the modem for a few minutes or unplug it overnight
If the modem is external, then you either remove the power cable from the wall or flip the switch on the back to the off position. If the modem is internal then you need to click "Start" in windows, then "Run" and type MSCONFIG.EXE and select the modem and "Disable" it using the apropriate button in the window. Windows will then not recognise it on startup.
In order to use your home DSL service on your Ipod Touch, you need to have a wireless router connected to your DSL modem. The Router sends off a wireless signal from your modem, which allows your ipod to recieve the internect connection. A router can be purchased in stores such as office max, best buy, radio shack, or staples, office depot.
This depends on what light is blinking and what type of DSL modem you are using. If you are having problems connecting to the Internet via your modem during the blinking phenomena you will want to reset your modem. This is usually done by pushing a small button on the back of your modem or sticking a pin into the small hole in the back where the button is housed within. Look up your specific modem make and model online and do a search query for the users manual. Many manufacturers have PDF documentation online.
Yes. In fact, this is the standard, intended way for a wireless router to work. ISP/Internet service DSL/Cable-----> Modem---->Router )))))) PC ---> Cable ))))) Wireless
Yes, it can be bad for your internet connection.
If the DSL Internet connection is not automatically connecting to the computer on a cold boot, it could be a problem with the modem. Try resetting the modem while the computer is off. Unplug it for 30 seconds, then plug it back in and wait until all lights stop blinking, then boot up the computer. If this does not work, get a new modem.
To operate a light switch, you simply flip the switch up to turn the light on and flip it down to turn the light off.
Hello this is Cesar from Embarq Support Online. First you will need to check the availability of High Speed Internet on our web site: http://www.embarq.com/#internet Once you sign up and get your equipment you can follow these instructions to get it setup and ready to go. # Connect your Embarq 660 modem to a phone jack in the wall using the phone cord provided. # Connect the yellow/red cable from the modem to the Network Interface Device (NID) located in the back of your PC. # Connect the power supply cable from the modem to the AC wall outlet. # Install a filter in all the other appliances that connects to a phone jack around the house, such as: satellite receivers, caller IDs, fax machines and phones. # Turn on the 660 modem using the power switch located in the back of the modem and wait for the DSL light to turn solid green. # Turn on your computer, open Internet Explorer and follow the instructions on your screen. Tips and troubleshooting, If you do not get the DSL light in the modem make sure you check the service due date and make sure you DSL has been activated. Usually we activate your account at the due date no later than 7pm. You can verify if you account has been activated by calling our National Customer Status Center 1-877-677-7596. If you r account has been activated but the DSL light does not come on the modem, unplug everything inside the house and turn your modem off and back on. If the DSL light comes on that means that you have a defective filter and needs to be replaced. If the DSL light does not come on after you unplug everything inside the house, then take the modem, phone cord and power supply and connect the modem into a different jack in a different room in the house. If you still do not get the DSL in the modem, please let me know and I will be happy to check the provisioning for your account and dispatch a technician if one is needed. Thanks P.S. Only send your phone number via email and never post your account information on the forum. We are a group of 3 Embarq agents who are authorized to provide online assistance to our customers. Please check one of the popular forums we usually frequent: http://www.dslreports.com/forum/clec,sprn Thanks Cesar L embarq_cesar@embarq.com