TaKe it to the shop they will tell you how
You change the oil.
If your are referring to the oil can light on the instrument cluster, that is not an change your oil soon light. It means that you need to check you oil levels cause you are low
change the oil filter
How do you turn off the change oil light on a Chevysilverado 2002
To reset the Oil Change Soon light on a 2008 Mercury Mariner, first turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal three times within five seconds. Turn the ignition off, then turn it back to the "ON" position to verify that the light has been reset. If the light remains on, repeat the process.
To turn off a service engine light soon on a 1997 Malibu, you will need to unhook the battery for up to 2 minutes. After you hook the battery back up, the light should be off.
Turn ignition to run position ,do not start ,press fuel pedal down 3 times within 5 seconds. .Change oil soon light will flash ,which means its resetting the system .Turn key off and you are good to go.
Key on, engine off. Press gas pedal to the floor three times in 10 seconds.
Warning lights come on when there is an issue. A Oil change light with turn off when an oil change has taken place.
You need to change the oil! And after that to turn off the light . It will cost you about $30-40 depending on oil brand and the filter. If you did change oil and it still on, you have to reset the computer by using an error code error which can erase codes or by disconnecting the battery for about 5-10 minutes.
On my 2002 I turn key to ON, but don't start, pump gas pedal 3 times, turn off key. Mark
a computarized test will tell the mechanic why that light is on. You can turn off that light with the computer but if the problem is not corrected it will go back on soon after turning the engine on.