Turn the ignition to the on position and put the gas pedal to the floor 3 times within 5 seconds. Many GM products reset this way. If that doesn't do it,read the drivers manual. It will tell you how to reset the change engine oil light.
Read you owner's manual.
To reset the Oil Change Soon light on a 2008 Mercury Mariner, first turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal three times within five seconds. Turn the ignition off, then turn it back to the "ON" position to verify that the light has been reset. If the light remains on, repeat the process.
How to reset service light on a 2004 grand am
I have had the light come on when I had a headlight out. me too. 9/15/05
You change the oil.
= How do you reset change oil soon light on 1993 buick park avenue? =
There could be several reasons why a 2000 Pontiac Grand Am service engine light soon has come on. The engine may need a tune up, the timing belt may need changed, or even a bad fuel pump.
remove battery cable for 1 min
If your are referring to the oil can light on the instrument cluster, that is not an change your oil soon light. It means that you need to check you oil levels cause you are low
There is no code associated with the "Change Oil" light like there is with the "Service Engine Soon" light.
Fill your coolant reservoir and the light should turn off. Do it soon or your engine may over heat.
Key on, engine off. Press gas pedal to the floor three times in 10 seconds.