the light tells you the engine has a problem turning off the light doesnt turn off the problem but vice versa a machanic can plug ina computer under you stering wheel which will tell them the problem for about $100 when they find the problem labour is deducted from the price but not parts
get the engine serviced.
You will need to access a diagnostic computer to turn off the check engine light on the 2003 Honda Accord. You could also remove the fuse from the dash lights or instrument panel.
The head lights have nothing to do with the check engine light.
Most engine compartment lights turn on when the hood is opened with a plunger switch or a tilt sensor. I have seen some that have a light that can be handheld and either have a switch on the light itself or it comes on when you remove the light from its holder.
turn ignition to poss 2, then hold down button for trip meter for about 15 seconds.. start engine, engine management light should go off...
push the odometer button in, turn the key on, wait till the light goes out (could be a long time), turn the key off.
There is o fuse for the check engine light. The check engine is controlled by the cars computer the only way to turn it off is to fix the problem that made it come on.
You will need a scanner to turn the light off. But if you have not repaired the problem it will come right back on. There is some auto parts stores that will turn light off for free.
You are going to have to take the vehicle into a service center for it to turn off. The light is a safety feature letting you know something is wrong with your car.
There are sensors all over the engine that can turn the check engine light on.There are sensors all over the engine that can turn the check engine light on.
Depends on which engine warning light you are referring to. If you are referring to the Check Engine light then have the problem repaired that caused it to come on in the first place. They will reset the light. Resetting the light without repairing the problem and it will just come back on.
After repairing the cause of the code, you clear it with a scan tool.