Push or turn the power button.
Push or turn the power button.
There are pages of things that can turn the light on. You need to have it checked for codes. See related questions below.
the bass button on radio
To unlock the radio on a 2007 Chevrolet Silverado, you'll need the radio's security code, which can usually be found in the owner's manual or obtained from a Chevrolet dealer. If the radio displays "LOC," turn the ignition on and press the power button to turn the radio on. Then, enter the code using the radio preset buttons. If you don't have the code, visiting a dealership with proof of ownership is the best option for assistance.
turn your radio off by pushing in the volume button, when the radio is off press the search arrows up or down to change the hour and minutes, when finished setting the clock turn the radio back on
look where the turn signal switch is and pull it back towards the steering wheel, that turns on the brights
if u have access to speakers turn on radio balance speaker control on radio ,hook a good speaker to each wire if it work check the radio
If it is not on the fuse panel then it is on the back of the dash near the steering column.
You can slightly depress the parking break while the vehicle is off and then turn it on again an go. The lights will be off then, although this is more of a temporary fix. You can slightly depress the parking break while the vehicle is off and then turn it on again an go. The lights will be off then, although this is more of a temporary fix.
Turn the ignition key to the on position. Turn the radio off and press the set button. Set the hour and minutes using the seek buttons.
No, its a bad earth somewhere
turn the radio on manually tuner in stations push the set button andnumber for station like 1 2 3 etc.
If it's the "change oil" light, turn the ignition to on, but don't start it, and tap the gas pedal 3 times.