its automatic if it doesn't turn on the bulb is out or the socket assembly is corroded and needs replacing.
Yes same engine.
how do you replace ambient light sensor on 2002 silverado
That requires an OBDII engine scanner to clear the codes / turn light off. But if you have not FIXED the problem that made it come on then it will just come on again. Have engine scanned.
No, the LS2 is an all aluminum 6.0 liter engine. The 5.3L engine in the 2000 Silverado is an LM7 version of the Vortec 5300.
The firewall separates the engine compartment from the passenger compartment
6 quarts.
If you're standing at the front of the truck and looking into the engine compartment the tension pulley is on the left side about half way down.
On a 2000 Ford Crown Victoria : The automatic transmission fluid level dipstick is in the engine compartment It can be found near the firewall ( the metal wall dividing the engine compartment from the passenger compartment ) It is at the rear of the engine , where the transmission bolts to the engine It is on the passenger side of the engine , inside the engine compartment
On a Ford Focus : The transaxle ( transmission ) is in the engine compartment , bolted to the engine , on the drivers side of the engine compartment
The vacuum lines on a 2000 Chevy Silverado run between the intake manifold and multiple valves across the top of the engine. The vacuum pressure is generated by the engine's compression.
In the engine compartment right on the back side of the corner light there is a ring with a spring that hooks to a tab. Unhook the ring and the corner light slides out
In your engine compartment , on the drivers side , by the firewall ( the metal wall that divides the passenger compartment from the engine compartment )