You buy a $30k- $150k scan tool, once you get it hooked up you check for any codes find the one for the air bag (mine was code "PO55-301A") and delete it
have fun with that
TO ADD TO THIS... Ignore the above "advice". Simply "deleting" or clearing a code will probably not fix the problem. It may, or better yet, PROBABLY WILL come back. A code is stored in the computer when the system detects a problem. It classifies the problem and stores the corresponding code in the vehicle for a mechanic to review later for diagnostic purposes. A light alomost certainly means a problem in the system, and it may be such that the system will not work as it should in a time of need. Take the vehicle to a competent service station and have it repaired, and this should turn the light out.
check your fuses or re-connect the airbag
If the airbag light is on, there is a defect somewhere in that circuit. You turn the light off by isolating and fixing the defect. Start with the fuse box.
To turn off the airbag light you need to give a firm, well placed punch to the person nearest to you.
The airbag light stays on when the computer detects a malfunction. The problem will need to be repaired before the light will turn off.
When the airbag light comes in in a car, it means that there is a problem with the airbag. In order to get the light turned off, one must take it to a technician.
The light is on because there is a problem with the SRS. Have it repaired by a pro, and he will turn off the light.
The SRS light stays on when the airbag computer detects a malfunction and sets a code. The light can not be turned off until the malfunction is repaired.
You need to have the code checked and the cause of it repaired to get the light off.
To reset your airbag light, in a Nissan Altima, you should turn the car on. From there, as soon as the airbag light stops flashing, turn the car off instantly. Repeat this three times to reset the airbag light.
Reset the light. Turn everything off. Turn the key on and off when the light just goes off. Keep doing this several times, the light will reset
For the airbag light to turn off, you'll need to repair the cause of the airbag malfunction, or disable the airbag by using a BMW scan tool or other software.
i installed a radio w/ harness and the airbag light is on, how do i turn it off or reset it?