0
if it is the check engine light that you are talking about then try taking the pos batary cable off for 10 seconds or more this some times will reset the computer and shut off this light if there is no trouble with the car if this dose not work then you must go to a dealer and have there tecks turn it off for a hefty price some times
AnswerGo to your local Auto Zone.They can hook up their reader (free!) and tell you what the computer thinks is wrong with your car.If you ask nicely, they usually will reset the computer for you. Then if the light stays off, you probably didn't have a real problem (possibly as sensor has intermittent contacts, happened to me). If the light comes back almost immediately, at least you know whats wrong.(BTW Nissan charges $65 just to tell you the same thing Autozone does)
What else can I help you with?
How do you turn off the malfunction indicator light in 2005 Chrysler Town and Country?
After fixing the cause of the code, you can clear the code with a scan tool.
What causes malfunction indicator light to come on?
A malfunction indicator light comes on because a detector elsewhere in the item has noticed a malfunction in whatever it is monitoring.
How do you reset the malfunction indicator light on a Honda s2000?
To reset the malfunction indicator light (MIL) on a Honda S2000, first ensure that the underlying issue triggering the light has been addressed. Then, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds, then turn the ignition off. When you restart the vehicle, the light should be reset. If the light remains on, further diagnostics may be needed.
HOW DO I TURN ON MALFUNCTION INDICATOR LIGHT IN 1996 FORD EXPLORER?
That's odd. Most people want to know how to turn it off. The MIL should illuminate briefly when you turn the key to the on position just before you start the engine.
How do you reset the malfunction indicator light on a 2008 Jeep Patriot?
To reset the malfunction indicator light (MIL) on a 2008 Jeep Patriot, first, ensure that the underlying issue triggering the light has been addressed. Then, you can disconnect the negative battery terminal for about 15 minutes to clear the light. Alternatively, you can use an OBD-II scanner to erase the trouble codes that are causing the light to stay on. After resetting, reconnect the battery or turn off the scanner, and the MIL should be off.
Why won't the motion light turn off?
The motion light may not turn off due to a malfunction in the sensor, a power issue, or interference from other light sources.
What is mil koeo failed?
Malfunction Indicator Light (MIL) commonly refered to as the check engine light Key On Engine Off (KOEO)
How do you reset the malfunction indicator light on 2007 Jeep Sahara?
To reset the malfunction indicator light (MIL) on a 2007 Jeep Sahara, first, ensure that any underlying issues have been resolved. Then, you can disconnect the negative battery terminal for about 15-30 minutes to reset the system. Alternatively, you can use an OBD-II scanner to clear the trouble codes that triggered the light. After completing these steps, the light should turn off.
What is the skid marks symbol in the dodge avenger 2012 mean?
That is the indicator light for the traction control system. If the light is on, the system is turned off or there is a malfunction.
How to turn off the airbag light on a 2007 dodge charger SE?
The airbag light stays on when the computer detects a malfunction. The problem will need to be repaired before the light will turn off.
How do you turn off the airbag indicator light on the Lexus ES300?
I would unplug the battery. This will reset your clock, etc., but it should turn the light off.
How do you turn off the SRS dash panel light on a 1997 Chrysler Sebring lxi?
The SRS light stays on when the airbag computer detects a malfunction and sets a code. The light can not be turned off until the malfunction is repaired.
