on the very top there is a port for the cable but you must have a 5 pin usb you can buy these in psp packs that include covers cables stands and heaps more for around $30 its worth the $30
ok then you have to plug it into the psp and computer then go to my computer click "removable Disk" then if you dont have a folder named MUSIC then make one but remember to rename it MUSIC in CAPITALS ok
for photos u put a folder named PHOTOS in CAPITALS for movies you put a folder called MP_ROOT then inside that folder make a folder called 100MNV01
hope this helped
if you want to put videos on your psp you mihjt want to have A program named lime wire and if you do search a video they must be mp4 because psp cannot subbstaine other kinds
First make sure you have a PSP Slim aka PSP 2001 and you check that by looking at the serial number at the bottom of your PSP if you have 2001 or above just plug the what apears to be a headphone jack into the head phone area on your PSP then plug it into the TV.
There is no way to get your PSP to connect to the computer without using a USB cable. You must use a USB to get one to port to the other.
You will need a USB cable, type A to Mini-B.
Put your psp in USB Mode wih a USB cable that you can find forlike $20.00. Or somehow put your psp's memory stick into the computer.
You need Sony's Media Go program, you use that to download your games from PSN and transfer it to PSP via USB, in case you haven't got wireless.
You can get a cable for your camera which would connect to a computer USB port.
You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.You connect each computer to a switch, using a UTP cable. Some small switches only have 8 ports; you can connect two such switches to each other, with an additional cable. Each computer has to have a network card.
Device Driver
Yes, you can using USB.
Your question presupposes that you have subscribed to cable internet service, and that the provider has run a cable to your home. It also presupposes that you have a cable modem. If these suppositions are correct, you just have to run coax between the cable jack on the wall and the cable modem. Then you need to connect the modem to your computer via USB, FireWire, or whatever interface your modem and computer have in common. FriPilot
This depends on which printer you have.Some printers have a serial cable and the newer ons have a usb cable. You connect the cable to the computer at the back . Then reboot your computer. You then insert the driver CD into the computer and then install the drivers for that printer.
Some modems install internally, others require a cable.
This is a 25 pin cable, usually used to connect a printer to your computer (parallel port). Most printers connect using the USB cable anymore, as other external devices.
Yes - Windows accepts external hardware while it's running without any problems !
solved (not what i meant tho i went to another website)
yes you can
You can link up your PC to the CM100 by using an Ethernet cable or USB cord. Connect the Ethernet cable to the CM100 Linksys modem and the other to the Ethernet port on your computer or if you are using USB connect the USB cord to the USB port on the computer.