0
Simply put. You do not use an easy-out tool to change spark plugs.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you change spark plugs and fix trottle on a 2006 vitara?
Consult the 2006 Vitara owner's manual to change spark plugs and fix the throttle. Remove the spark plug covers by pulling the caps. Use a spark plug socket to remove the old spark plugs. Use the same tool to place the new spark plugs. Replace the spark plug caps. Locate the throttle compartment under the hood. Use a wrench to loosen the nut around attached to the throttle. Adjusting this nut and cable to the throttle will in turn change the amount of RPMs.
How do you change spark plugs on Mercedes w208 320 1999?
Changing the spark plugs in a Mercedes w208 320 1999 only requires two tools to be used. The first tool is a 3/8 wratchet that has a short extension and the second tool part is a universal socket. Attach the universal socket to the spark plug socket and use the wratchet to loosen each spark plug. Use the same tools to tighten the new spark plugs into place.
What tool removes spark plugs off 1997 Mercury Villager?
A spark plug socket.
What tool is used to change spark plugs for a 02 dodge neon?
5/8 inch spark plug socket.5/8 inch spark plug socket.
How do you change the spark plugs for a 1996 Ford Ranger 4 cylinder 2.3 liter?
Do this one plug at a time, and reconnect that wire so as to not get wires mixed up. REMOVAL Remove spark plug wires from spark plugs with a Spark Plug Wire Remover tool, pull outward on the boot with a slight side-to-side twist. Loosen spark plugs and remove any dirt or foreign material from spark plug areas of cylinder head with compressed air. Remove spark plugs. INSTALLATION Inspect and adjust spark plugs. Spark Plug Gap: 0.042" to 0.046". Install spark plugs. Tighten spark plugs to 9-20 N.m (7-15 lb in). Connect spark plug wires to spark plugs.
What tool is used to remove 2001 Chrysler Town and Country spark plugs?
The plugs are removed with a ratchet and 5/8 inch spark plug socket.
How do you change spark plugs on a 2006 Jeep Wrangler Rubicon?
Remove the four bolts holding the coil pack to the passenger side cylinder head. Lift coil rail off of engine. Using the appropriate sized spark plug tool, unscrew the spark plugs 1 at a time from the engine and replace with correctly gapped plugs.
How do you change spark plugs in e250 cargo van?
I just replaced my spark plugs on a 1998 Ford E250 V6. The best price I could get for a mechanic to do it was $400.00. I did not want to pay this price and I am glad I didn't because changing the spark plugs took less than 1 hour. I went to Pep-boys and purchased the plugs and wires for about $50.00. (I had to purchase a spark plug socket for my ratchet.) To get to the spark plugs I removed the middle console from the inside of the truck's cab and the spark plugs were right there. You should be able to do this with no problem. (Stay away from the spark plug removal tool, use the socket and ratchet instead.)
What tool is needed to change spark plugs in a 2.2 Camry 1997?
A spark plug socket, which is a deep socket with a rubber ring inside to grip the spark plug. They come in different sizes, so find out which spark plugs your car takes, buy some new ones, have the store you buy them from write down the gap specification on the box for you, then take one of the plugs out and find out what size socket it takes. In addition to the socket, you will need a ratchet, and, possibly, an extension. You will also need a spark plug gapping tool, to set the gap on the plugs properly. Be careful installing the new plugs, as it easy to cross thread them. Tighten them according to the torque specifications in your maintenance manual. If you don't have a maintenance manual, look for a Haynes or Chilton manual at the auto parts store. They run about $20, and will tell you how to do just about anything you need to do on your car.
How do you change spark plugs 2002 kawasaki voyager?
gas tank cover comes off. remove battery. use compressed air to blow out debris before taking plugs out. I use a spark plug socket from my tool set with an extension and u-joint. not a difficult job.
What tool is used to remove spark plugs from a 94 suzuki sidekick?
The correct spark plug socket with a really long extension
How do you replace the spark plugs in a 1985 Nissan 300ZX non turbo?
In the back of your car, under the floor mat, on the driver's side is a "tool kit". It includes your jack,wheel stops,etc. In this kit is a LONG TUBE. This is your spark plug remover!!! Simply remove your spark plug cable and reach into the plug hole with the tool and unscrew the plug out. Before removing the plugs blow out any dirt that is around the plug, the dirt if not removed may get into the cylinder when you change the plugs.
