A gooseneck is something crooked, like a goose holds its neck. You usually hear this in the term gooseneck lamp, which is one of those adjustable ones with the curving metal tubes. You could say "I bought a gooseneck lamp for my desk," or "This gooseneck lamp really lets me shine the light on exactly the right spot."
If you are interested in finding gooseneck trailers on Craigslist, there are a few different ways. The most popular and easiest is to use the search bar in their website and type in the information
you shouldn't have to weld on a good gooseneck hitch. a good gooseneck is a bolt on accessory. check out the B&W turnover ball website http://www.turnoverball.com/
Yes there are places online where you can go to get information on sellers of gooseneck trailers. You can fo to www.kaufmantrailers.com/.../Gooseneck-Equipment for some help.
form_title= Gooseneck Trailers form_header= Add a gooseneck trailer to your vehicle. What is the make and model of your vehicle?*= _ [50] What will you be using the trailer for?*= _ [50] Do you want a new or used trailer?*= () New () Used
There is a black rubber hose about 1 1/2" in diameter attached to the top part of the radiator. On the other end of that hose is an aluminum "gooseneck" fitting that bolts on to the Head with two bolts. The Thermostat is inside that "gooseneck". Be careful, the gooseneck is very fragile. Be sure everything is properly aligned before you tighten the bolts or you will crack it. You should use a new gasket when replacing the "gooseneck" back on the Head.I also use a gasket sealer compound.Vaya con Dios,Chuck, CABGx3Read more: Where_is_the_thermostat_located_in_a_1989_ford_festiva
On the top part of your Radiator, there is a large hose, about 1 1/2" in diameter going over to a "gooseneck" fitting which is bolted to the head with two bolts. Drain the radiator, remove the hose, and remove the two bolts holding the gooseneck to the head. Inside the gooseneck is where the thermostat goes. Use a new gasket and be VERY careful to put the new thermostat in position correctly and to bolt the gooseneck back to the head......incorrectly done the gooseneck can break! I've done it and another one is very hard to come by. Once the gooseneck is in place, reconnect the hose and fill the radiator. That's it, but again, be VERY careful. Vaya con Dios, Chuck, CABGx3
pull the heater hose off the gooseneck, remove 2 bolts from gooseneck, remove gooseneck take out thermostat, chean off old gasket, install new thermostat and gasket. bolt back on and connect hose. replase what antifreese you lost.. pull the heater hose off the gooseneck, remove 2 bolts from gooseneck, remove gooseneck take out thermostat, chean off old gasket, install new thermostat and gasket. bolt back on and connect hose. replase what antifreese you lost..
Open the hood, locate upper radiator hose, follow the upper radiator hose from the radiator to the "gooseneck" located on the engine, the thermostat is located under the "gooseneck". The "gooseneck" has to be removed to replace thermostat.
There is a black rubber hose about 1 1/2" in diameter attached to the top part of the radiator. On the other end of that hose is an aluminum "gooseneck" fitting that bolts on to the Head with two bolts. The Thermostat is inside that "gooseneck". Be careful, it's fragile. You should use a new gasket when replacing the "gooseneck" back on the Head. Vaya con Dios, Chuck, CABGx3
Never changed one on a Mountaineer but have chnged them on several other vehicles. Follow the upper radiator hose to where it connects to the gooseneck which is held to the engine with two bolts (usually). After draining the radiator and removing the upper radiator hose from the gooseneck, remove the bolts from the gooseneck and the thermostat should be just underneath. The gooseneck is also called the thermostat housing.
Traileroutlet.com has a wide selection of all types of trailers. Also try trailersforless.com for a good selection of gooseneck flatbed trailers.
pretty much any brand gooseneck hitch you buy will fit any pickup all you have to be aware of, is that the gooseneck hitch you buy has correct load rating for the load you will be pulling with this hitch