0
ou can run the ping command on a Windows
computer by opening an MSDOS window and
then typing "ping" followed by the domain name
or IP address of the computer you wish to pin
Wiki User
∙ 13y ago
Wiki User
∙ 14y agoPing relies on the ICMP protocol, which is used to diagnose transmission conditions. For this reason, it uses two types of protocol messages (out of the 18 offered by ICMP): * Type 0, which corresponds to an "echo request" command, sent by the source machine; * Type 8, which corresponds to an "echo reply" command, sent by the target machine. At regular intervals (by default, every second), the source machine (the one running the ping command) sends an "echo request" to the target machine. When the "echo reply" packet is received, the source machine displays a line containing certain information. If the reply is not received, a line saying "request timed out" will be shown.
Wiki User
∙ 14y agoThe function of the ping command is to see whether you can reach a particular machine. Your machine sends a special message, and the other machine replies. Ping is part of the ICMP protocol.
Example 1:
ping 10.0.0.7
This check whether you can reach this specific address.
Example 2:
ping wiki.answers.com
This only works if DNS is working. If DNS does work, the ping will go ahead testing connectivity to the corresponding IP address.
The function of the ping command is to see whether you can reach a particular machine. Your machine sends a special message, and the other machine replies. Ping is part of the ICMP protocol.
Example 1:
ping 10.0.0.7
This check whether you can reach this specific address.
Example 2:
ping wiki.answers.com
This only works if DNS is working. If DNS does work, the ping will go ahead testing connectivity to the corresponding IP address.
The function of the ping command is to see whether you can reach a particular machine. Your machine sends a special message, and the other machine replies. Ping is part of the ICMP protocol.
Example 1:
ping 10.0.0.7
This check whether you can reach this specific address.
Example 2:
ping wiki.answers.com
This only works if DNS is working. If DNS does work, the ping will go ahead testing connectivity to the corresponding IP address.
The function of the ping command is to see whether you can reach a particular machine. Your machine sends a special message, and the other machine replies. Ping is part of the ICMP protocol.
Example 1:
ping 10.0.0.7
This check whether you can reach this specific address.
Example 2:
ping wiki.answers.com
This only works if DNS is working. If DNS does work, the ping will go ahead testing connectivity to the corresponding IP address.
Wiki User
∙ 14y agoThe function of the ping command is to see whether you can reach a particular machine. Your machine sends a special message, and the other machine replies. Ping is part of the ICMP protocol.
Example 1:
ping 10.0.0.7
This check whether you can reach this specific address.
Example 2:
ping wiki.answers.com
This only works if DNS is working. If DNS does work, the ping will go ahead testing connectivity to the corresponding IP address.
Wiki User
∙ 13y agoThe ping command sends a small amount of data to a certain site or ip adress, and checks for a response. It is used to check the speed of a connecion or the reliability of a network.
Wiki User
∙ 9y agoIn internet terminology, a ping is a short packet of data sent in two directions. The time it takes for the information to return is known as latency.
Wiki User
∙ 7y agoThe ping command is a troubleshooting command used both to verify network connectivity and estimate the "distance" between nodes.
Wiki User
∙ 11y agowhere are you
Add your answer:
Earn +20 pts
What commands is used to ping a multi-function device?
The trace route command is used to ping a multi-function device.
Which command is equivalent to the command PING Localhost?
ping 127.0.0.1
Which networking command is most popularly used to test the connectivity of between systems and networks?
The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.The ping command. Traceroute is also useful, but I would start by using the ping command.
What command verifies the existence of a node on a network?
PING command verifies the existence of a node on a network. Ping command is a command of command line interface . It is used to check if the host is alive or not.
When using the ping command how do you instruct the ping command to display statistics while in the middle of a ping operation?
Send it the SIGQUIT signal.
What is the function of the command - Is?
The function of the ping command is to see whether you can reach a particular machine. Your machine sends a special message, and the other machine replies. Ping is part of the ICMP protocol.Example 1:ping 10.0.0.7This check whether you can reach this specific address.Example 2:ping wiki.answers.comThis only works if DNS is working. If DNS does work, the ping will go ahead testing connectivity to the corresponding IP address.The function of the ping command is to see whether you can reach a particular machine. Your machine sends a special message, and the other machine replies. Ping is part of the ICMP protocol.Example 1:ping 10.0.0.7This check whether you can reach this specific address.Example 2:ping wiki.answers.comThis only works if DNS is working. If DNS does work, the ping will go ahead testing connectivity to the corresponding IP address.The function of the ping command is to see whether you can reach a particular machine. Your machine sends a special message, and the other machine replies. Ping is part of the ICMP protocol.Example 1:ping 10.0.0.7This check whether you can reach this specific address.Example 2:ping wiki.answers.comThis only works if DNS is working. If DNS does work, the ping will go ahead testing connectivity to the corresponding IP address.The function of the ping command is to see whether you can reach a particular machine. Your machine sends a special message, and the other machine replies. Ping is part of the ICMP protocol.Example 1:ping 10.0.0.7This check whether you can reach this specific address.Example 2:ping wiki.answers.comThis only works if DNS is working. If DNS does work, the ping will go ahead testing connectivity to the corresponding IP address.
What does -t mean in TCP IP ping?
TCP/ IP stands for transmission control protocol / Internet protocol suite. Ping is a command of command line interface . -t in TCP IP ping means to repeat the ping command continuously.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.It means to repeat the ping command continuously, until you interrupt with Ctrl-Break.
What is the use of ping command in ms-dos?
Ping command is used to check the network connectivity. You can use ping command from windows shell only, not from DOS OS as DOS does not supports networking. You can use "-t" switch with ping for continuously network checking.Syntax: Ping Example: ping 192.168.1.15 or ping 192.168.1.15 -t or ping -t 192.168.1.15
What is ping command and describe the usage of ping command?
The ping command is to check that an IP address is reachable. the ping command is used to know the active networks and ip address in the network. it also used to self check the address when there is connection trouble with other system. internet control message protocol is used by the ping.
How do you ping the default gateway or ping the printer for a PC that cannot connect to any remote websites?
USE THE PING 127.0.0.1 COMMAND AT HTE COMMAND PROMT
A technician uses the ping 127.0.0.1 command What is the technician testing?
The ping 127.0.0.1 has host name Loopback, and is used to ping your server to verify software. On the command prompt, the technician would type, PING '127.0.0.1' or PING LOOPBACK.
Is Ping Command an MS DOS External command?
yes it is an external command.
