weld up planet gears more you weld the better just to stop them from turning,dont recommend for road use though!!!
Weld center diff and remove front ring gear. Remove front axles. has been done.
It should fit. Although you will most likely have to remove the old shock, sway bar, and spring mountings and weld them on to the other diff. Also check the length of the chevy. diff.
It locks the rear diff, thats all
yes it is. to check look for the big diff in the rear axle. big diff? a large round metal casing.
REAR - 2.4L 96-99 DIFF CAPCTY LTRS 2.75 REAREXC LIMITED SLIP DIFF -2.7L,3.4L 96-99 DIFF CAPCTY LTRS 2.95 REARw/LIMITED SLIP DIFF -2.7L,3.4L 96-99 DIFF CAPCTY LTRS 2.95 REAR - 2.7L, 3.4L w/LOCKING DIFF 96-98 DIFF CAPCTY LTRS 2.00
there is 2 different ways to change the fluid this is a drain plug on the front of the rear diff or you can take the back of the pumpkin off on the rear diff.
Dana 44 front diff and 9.25 rear diff
No the e30 rear diff has different mountings but there are big and small diff models so as long as you have one of the bigger diffs from an e30 i have been told that the rear mounting plates can be swapped over but can not guarantee it. Hope this helps, B Paice
bolt diff cap what is it
Rear diff, 7.9 pints.Front diff, 2.4 pints.
there is no actual drain plug on the rear diff. the fill plug is on the right side of the diff just above the gusset it takes a 3\8 ratchet to remove it then u need a vacuum pump to remove the 80\90 gear lube otherwise you must remove the rear diff cover to fully drain the rear diff also you will need a new gasket for that as well
that model comes with a factory rear diff locker