To wire the coil in a Mercury Bobcat:
The + terminal goes to the "run" prong on the ignition switch.
The - terminal goes to the points and condenser.
The middle terminal (the one with the fat wire coming out of it) goes to the center post on the distributor.
This is how you wire the coil in any car that has points and condenser.
The Bobcats that are little construction machines have diesel engines in them, so there's no coil at all.
The coil is inside the distributor. There is no coil wire.The coil is inside the distributor. There is no coil wire.
yes coil is a type of wire
The coil wire.
The coil wire runs from the coil to the center of the distributor cap.The coil wire runs from the coil to the center of the distributor cap.
There is no coil wire. There is a coil pack and connected to the coil pack is the ignition control module.
Toyota Camry coil wire can burn out from age or excessive use. The manufacturer recommends that you change the coil wire every 30,000 miles.
electric current in the coil of wire.
If you see no center coil wire connector then the coil is mounted inside the distributor. If there is a center coil wire connecter then follow the coil wire and it will go to the coil.
There is no coil wire. The coil is built inside the distributor.
Failed coil wire, failed rotor, failed capFailed coil wire, failed rotor, failed cap
Turns in a wire coil refer to the number of times the wire loops around the core of the coil. It is a measure of how tightly wound the wire is within the coil and affects the strength of the magnetic field produced by the coil. More turns generally result in a stronger magnetic field.
The coils are bolted to the ignition control module, there is no coil wire as such.