You put the wire in the plastic coat and you connect them to the controllers.
No, you need a kinect thing for it so you can be the controler but you can get wire less controler
They refer to the number of I/O lines (not power) needed to transfer data between to processors/controllers.3 wire serial has a bidirectional data line, a clock line, and a master/slave line.2 wire generally is clock and data.
The lowest retail controllers are not wireless and you need to be close enough to the xbox for the wire to reach which is usually around 10' Otherwise you will need to look into used controllers for lower prices.
they charge after you have put the usb wire into the ps3 usb then pluged the other end into the controller
On the top. You'll need a special wire since the connection isn't the same as the one on your computer, but it's a pretty common wire - your digital camera probably uses the same one. The charging wires for the controllers on the PS3 use the same wire
you plug it in to the same charger (the one with the wire coming out of the ps3)that you use to charge the normal controller. However, if you have a stand charger ( one that can charge multiple controllers at a time), do not use this to charge move controllers as it will damage the connection when charging.
Well there are many styles of controllers ranging from guitars to regular controllers. But without one of these types of controllers no you can not play.
All controllers designed for the GameCube will work with it. Nintendo64 controllers will not.
About 8 controllers
yes
no snes controllers do
2 controllers