Want this question answered?
what year diesel what size diesel if it is 7.3 powerstroke, u remove serpentine belt next you unplug wire harness from back of alternator then you remove 2 bolts that hold alternator to engine lift alternator off installation is exact opposite easiest alternator to change out
No, to show you I would have to be there with you and I am not.
Its the big black wire coming off the battety going into a smaller wire that connects to the alternator. the big black cable connects to a wire 4x as small that wire is the fusible link.
run it and then disconnect the negative wire from the battery if alternator dies its bad.
If you have a new alternator its as simple as run the one wire to the solenoid. If you are converting the alternator to a one wire, you will need an external regulator. If you have a new alternator its as simple as run the one wire to the solenoid. If you are converting the alternator to a one wire, you will need an external regulator.
What type of alternator do you want to install? if you have not got one yet, purchase a 1wire self energizing alternator from any good farm parts store, we sell Dixie part number #A1133-1ws, for about $110.00 65amp
a bad ground wire can ruin an alternator by not completing the circuit
2 wire has a live wire to energise the field where as the single wire alternator self energises and does not need the powered feed.
This wire allows the alternator to keep the battery charged.
It is the wire that supplies the initial field current to the alternator from the battey. Once the alternator is rotating the field current will be provided by the diodes from the current produced by the alternator. excitor wire is usually wired through the charging indicator light.
It depends on where the wire is being connected on the alternator. It could be the alternator or it could be a damaged wire or connector. It's something that you will need to track down.
No.