0
How do you wire a three wire 220v for dryer White to white but where does black and ground go?
Wiki User
∙ 13y ago
If the cable you are trying to connect the dryer up to only has a white, black and ground wire, then the dryer is not going to work. The cable needs to be a three wire, the ground wire is never counted when discussing house wiring.
Open up the electrical access panel on the back of the dryer. You will see a terminal block. A red and black and white connect to this terminal strip. The "hot" wires are connected to the outside terminals. The neutral (white) wire will be in the center. Connect the ground wire to the frame of the dryer. It is very important that this ground wire be connected as this is the wire that carries the fault current to trip the breaker should a fault arise.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Configuration for 50 amp dryer plug with black white and green wires?
There is no configuration with that amount of wires. Proper connection requires three wires and a ground.
How do you attach a 4 wire power cord to electric dryer?
in back of dryer u should have a block with three wires 2 blacks 1 green the one u are trying to wire up should have 2 black 1 green 1 white the white and green wire go in the midle post of the block on the dryer and the other 2 wires go to the out side posts of the block
How do you install a swag kit with two wires to a light with three wires?
I am guessing that your 3 wires are black (hot), white (neutral) and bare or green wire (ground). Connect black to black, white to white and ground wire to the metal case of swag kit.
How do you wire a 4 wire dryer plug into a 3 wire?
You cannot wire a 4 wire dryer plug into a 3 wire outlet for mobile home use - (US NEC) - you must carry all four conductors all the way back to the distribution panel. In a hard wired house configuration, if the dryer is designed to support it, you can replace the pigtail with a three wire pigtail, and connect neutral to ground inside the dryer connection panel. Check your local electrical codes and laws for specific requirements.
How is a three pin plug assembled in production?
black = HOT White = Neutral (current carrying) Green = Ground
On three wire spin dryer cord which color green white?
On a 3 wire dryer cord there is no green wire. The white wire coming from the outlet is connected to ground or the green screw. The black and red wires are the hot wires.
Configuration for 50 amp dryer plug with black white and green wires?
There is no configuration with that amount of wires. Proper connection requires three wires and a ground.
How do you attach a 4 wire power cord to electric dryer?
in back of dryer u should have a block with three wires 2 blacks 1 green the one u are trying to wire up should have 2 black 1 green 1 white the white and green wire go in the midle post of the block on the dryer and the other 2 wires go to the out side posts of the block
How do you install a swag kit with two wires to a light with three wires?
I am guessing that your 3 wires are black (hot), white (neutral) and bare or green wire (ground). Connect black to black, white to white and ground wire to the metal case of swag kit.
How do you wire a 4 wire dryer plug into a 3 wire?
You cannot wire a 4 wire dryer plug into a 3 wire outlet for mobile home use - (US NEC) - you must carry all four conductors all the way back to the distribution panel. In a hard wired house configuration, if the dryer is designed to support it, you can replace the pigtail with a three wire pigtail, and connect neutral to ground inside the dryer connection panel. Check your local electrical codes and laws for specific requirements.
How is a three pin plug assembled in production?
black = HOT White = Neutral (current carrying) Green = Ground
You are trying to change a 3 prong cord to a 4 prong your new dryer has two green cables attached to the inside of the dryer?
Dryer plug three to fourOpen up the electrical access panel on the back of the dryer. You will see a terminal block with three wires going into it from the plug cord assembly. A red and black and white are now connected to the terminal strip. Look at the position and colours of the existing 3 prong cord and how it is connected. Make a diagram. Coloured wires on the outside terminals white in the center. From the center wire terminal you will see a jumper strap that goes to the frame of the dryer. When installing the four prong plug this jumper is removed completely. The kit should have with it a grounding lug that connects to where the removed grounding strip attached to the frame of the dryer. This is the attachment point for the fourth green ground wire from the new dryer cord assembly.
How do you wire a garbage disposal between the disposal and the GFI?
White and the ground go to the disposal, black goes through a switch and then to the disposal. All three go through the switch box, the white and ground just pass through on the way to the disposal. Break the black with the switch.
What are the names of the three wires in mains electricity?
Load (or hot wire, usually black or red), Neutral, (white), and ground,(green) wire.
What is the red wire and what wire does it go with when there are three wires black red and white?
Red, white, and black are standard for a three-way switch (you have two switches that control the same fixture). You should also have a ground wire (copper, unsheathed). The black and red are negative, while the white is positive. It works pretty simply. When the switch is up, the black and white are linked, creating a circuit. When it is down, the red and white are linked. If both switches agree (both are red/white or both are black/white), then the circuit is completed and power flows.
How do you wire a 240V stove plug if old stove was hard wired and had 4 wires Black red white and ground coming from the wall are three wires Black red and a shield wire is the shield wire the neutral?
Shield is ground. White is Neutral, center tap of the transformer from the power company.
Where notes are related to black notes?
'A' is the white key in between the second and third black key in the group of three black keys. 'B' is the white key to the right of the three black keys. 'C' is the white key to the left of the two black keys. 'D' is in between the first and second black key of the two black keys. 'E' is the white key to the right of the two black keys. 'F' is the white key to the left of the three black keys. 'G' is the white key between the first and second black keys of the group of three.
