The air fins on the motor must have air moving across them. So, the bike must be moving or have a fan in front of it.
yes
how does engine cooling system on berlingo 1.4 work
Evaporative cooling pads work by allowing water to evaporate and cool the air passing through them. As the hot air moves through the pads, the water evaporates, absorbing heat from the air and lowering its temperature. This cooled air is then circulated into the cooling system, helping to lower the overall temperature.
An air cooled system uses cooling fins, in which air is either blown past these fins by a flywheel or a cooling fan, this air that is blown into these fins carries residual heat away from the cylinder jug.
Engine cooling system is not a closed system you can't remove the air.
Engine cooling system is not a closed system you can't remove the air.
Air bound means that there is an "air bubble" in the cooling system that is preventing coolant from circulating in the cooling/heating system. (air can be compressed fluid cannot)
COOLING SYSTEM OF WHAT ??????????????????????? Most auto parts stores sell cooling flushing kits. Get one follow the directions and it should take the air out of the system. You must remember that your heater is part of the cooling system as well as the cooling for your transmission.
You may have air pockets trap in the cooling system.
Air bound means that there is an "air bubble" in the cooling system that is preventing coolant from circulating in the cooling/heating system. (air can be compressed fluid cannot)
Should bleed all vehicles after the system has work done to it to get rid of air pockets
If the cooling system is in good working order the system will bleed the air out itself. If the system has a leak anywhere no matter how small the system will never bleed the air out.