0
What else can I help you with?
What special switch uses a built-in thermometer to control temperature?
volt
A 120 ohm resistor a 60 ohm resistor and a 40 ohm resistor are connected in parallel to a 120 volt power source. What is the current running through the 120 ohm resistor?
1amp
Can I use a 12 volt 1amp battery chargermaintainer on my 48v golf cart?
No. You can only charge one 12 volt battery at a time or two 6 volt batteries wired in series at a time if you want to use that 12 volt charger.
What is the correct wiring diagram for a 220 volt pressure switch?
The correct wiring diagram for a 220 volt pressure switch involves connecting the power supply to the switch terminals and then connecting the load to the switch terminals. It is important to follow the manufacturer's instructions and consult a professional if needed.
Colour coding voltages for smps?
orange having 3.3 volt yellow having +12 volt red having +5 volt blue having -12 volt black having ground Violet and gray having 5 volt green is for power switch
Why do i still have 12 volt when i use disconnect switch in my RV?
The RV has a 12 Volt DC power supply that operates all the 12 Volt DC items in your RV when your plugged in to 110 V AC.
Can a computer built in England on 240v work in a country that uses 110v?
Its all in the power supply. If there is a switch that lets you change the input voltage from 240 to 120 then you are fine. Most computers have this switch on the power supply, its located on the back of the computer up by the top. All you will have to do is change the plug on the cord to fit that country's 120 volt receptacle.
What year did Chrysler switch from 6 volt to 12 volt?
1956
When did Chevrolet switch from 6 volt to 12 volt?
1954-1955
Tap switched12v power in your car?
Please be aware that using 12 volt power off the ignition switch must be done carefully as the Ignition switch only has so much load carrying capacity.
Can you use a 12 volt dimmer switch for a 240 volt ceiling rose?
No, the voltage rating of the switch is too low.
How can you determine if their is power at a light switch?
Use a volt meter to measure the voltage to neutral on each side of the switch. By turning the switch on and off and monitoring the voltage on one side and then the other, you can determine the supply and load side of the switch.
