If you think there is a discrepancy in the meter reading, phone the utility company. It is there responsibility to come out and check to make sure that the readings are correct. It falls within the consumer protection act and weights and measures act that the tolerance of their measuring equipment is to be within the specified tolerances allowed by governmental departments.
Cause there is ...
in a digital meter you get a digital value of your measurement. but in analog meter you have to check the position of the pin along the scale and find out the value.
Your main breaker should tell you the amps of your panel.
Edward Weston, in 18888, invented portable DC voltmeter
Q-meter works on the principle of Series Resonance
The best way to write an authorization letter for electric meter application is using a sample format. Downloadable sample formats for this letter can be found on the website SharePDF.
Your electric utility company has a meter department capable of answering this. There are usually pictures of the meter dials/digits included in teaching someone to read the meter, so this is not a good forum to do so. If your electric company does not have the meter in question, find out the manufacturers name, and your utility meter department may help locate a contact at the manufacturer for you. Usually, residential meters have a hot sheet typed up showing how to read them, and the utility will simply mail it to you or possibly scan/fax it.
To be honest I have no idea I just like answering questions 
A digital multi meter is what is used to find electric current. A block diagram shows all of the working parts of the multi meter and how they are connected.
one electric meter two shoap in legal .
The unit of electric flux is Volt-meter or Newton-meter^2 Coulomb^-1.
Sure an electrical meter can be enclosed tazim
Cause there is ...
Depending on the type of problem you're working on, the usual suspects are meter, million or mass.
in a digital meter you get a digital value of your measurement. but in analog meter you have to check the position of the pin along the scale and find out the value.
find your electric Meter and you've found the point of entry, or depending on where the electric meter is in the building, you can trace the cable back from the meter to the point of entry.
An ampere meter