0
What else can I help you with?
Why doesnt waterfilled balloon burst when heated?
You can have the candle flame actually touch the balloon, and the balloon won't break! The water in the balloon is absorbing the heat from the candle. The balloon conducts heat very well, so the candle flame transfers to the water without harming the balloon.
Why balloon filled with water not pop when heat is applied?
When heat is applied to a balloon filled with water, the water absorbs some of the heat energy, preventing the balloon from reaching a temperature high enough to burst. The water inside the balloon also helps dissipate the heat more evenly, reducing the likelihood of a rapid increase in pressure that could cause the balloon to pop.
How come when you put water in a balloon and you put it on top of lit candle it won't pop?
When you put water in a balloon and place it over a lit candle, the water in the balloon absorbs and distributes the heat from the flame, preventing the balloon from bursting. The water acts as a heat sink, keeping the balloon cool enough to withstand the heat from the candle without melting or bursting.
Why does balloon filled with water do not blast when it is shown to fire?
Why does the balloon with no water break in the flame? And balloon with water not break? The flame heats the rubber of both balloons. The rubber of the balloon without water becomes so hot, that it becomes too weak to resist the pressure of the air inside the balloon. When water inside the balloon is placed in the flame, the water absorbs most of the heat from the flame. Then, the rubber of the balloon does not become very hot. Because the rubber does not become hot, it does not weaken, and the balloon does not break. Water is a good absorber of heat
What should happen to balloon if it's placed above some boiling water?
If a balloon is placed above boiling water, the heat from the water will cause the air inside the balloon to expand. The balloon will likely inflate and may eventually burst if the heat is not removed or the balloon is not released.
Why wont balloons pop when over fire when there is water in it?
Inside the balloon with no water at all, the intense heat from the hot fire will melt the surface of the balloon. The pressure inside the balloon is so big that the balloon deflate and POP! With water, the water conducts the fire away from the balloon so the suface may not reach high tempertures. The balloon is remained inflated.
Does the heating on a bottle affect the volume of a gas?
Yes! If you heat a bottle with hot water, the balloon would grow bigger and bigger while if you put it under cold water, you would find out that the balloon became deflated again.
Why a balloon filled with water expands very little when heated?
Water is very good at soaking up heat. When the water-filled balloon is heated the water Draws the heat away from the rubber. For the air filled balloon, not so much. The rubber heats up, weakens, and breaks.
How can you inflate a H2O balloon?
To inflate a water balloon, stretch the balloon opening over a faucet and turn on the water slowly until the balloon reaches the desired size. Alternatively, you can use a water balloon pump to inflate the balloon. Just make sure not to overinflate it to avoid bursting.
Can you hold a balloon under a flame without popping it?
No, holding a balloon under a flame will cause it to pop because the heat weakens the rubber material, leading to a sudden burst. It's not advisable to expose a balloon to direct flame or heat sources.
Why doesnt a water balloon pop when it is over fire?
It's because the water inside the balloon absorbs the heat of the fire. If you hold it there long enough the water inside will boil and then it will pop, because the fire will start getting attracted to the heat, so then all the water will get enough of holding on, and then it will pop(the balloon).Water is a very great substance for soaking up any kind of heat. The thin balloon allows the warm heat to pass through very quickly and warm the cold water. As the water closes up to the flame as it heats up, it begins to rise and cooler water replaces it at the bottom of the balloon. This cooler water then soaks up more heat and the process repeats itself. In fact, the exchange of water happens so often that it keeps the balloon from ever popping!The soot on the bottom of the balloon is actually carbon. The carbon was deposited on the balloon by the flame, and the balloon remains undamaged. I even tried this for a science fair, and it was pretty cool. I found it on the internet and stuff, it was plain cool. Like the judges were SO excited, and they were watching and watching and the balloon didn't pop. Then, finally, when I felt the balloon and it started getting warmer, I explained why it was getting warm, and the judges loved how I presented. You should try it for a science fair, who knows, you might win!
What happens if you put ballon in the hot water?
When you put a balloon in hot water, the air inside the balloon will heat up and expand, causing the balloon to inflate and possibly burst due to the pressure buildup. The heat causes the air molecules inside the balloon to move faster and spread out, increasing the volume of the air inside the balloon.
