In mechanics,work done(work=force.displacement of body) by a body is independent of path.It only depends on the initial and final state of the body.However in thermodynamics,the work done by an ideal gas(work=pressure.change in volume of gas) depends on the path taken(isochoric,isothermal,isobaric,adiabatic)
Nothing.. Gunpowder does not impact-detonate, which is why bullets have a "primer" that will ignite the gunpowder when it is struck. Nothing.. Gunpowder does not impact-detonate, which is why bullets have a "primer" that will ignite the gunpowder when it is struck.
You need to get all the supplies and get 2 gallons of gas.
The gas water heater works through a principle of physics which is known as convection. The gas heater is similar to a water heater only that it has one heating unit.?æ
yes.
Go to your local Small Engine Repair shop and ask for a gas cap with the primer pump on cap. They work great!
A cracked primer bulb. You will need to replace it.
Firing pin strikes primer, primer ignites powder, powder burns and turns into gas, gas expands and pushes projectile out of the barrel
Firing pin strikes primer, primer ignites powder, powder burns and turns into gas, gas propels the shot cup down the barrel, shot cup exits barrel and falls away from shot column at @ 7m, shot column begins to string out and form circular pattern.
Very likely your primer which causes a vacuum to pull the fuel from the tank to the carburetor has a "rubber ball" and rubber gasket that has cracked, causing it to leak gas.
cracked gas line, cracked bulb, or weedeater out of gas
No, it will not work for that.
Because it probably has a crack or a hole in it.
bulb may have a tear or crack, af gasket may be loose or to tight, carb could be gummed up, no gas in unit.
It sucks gas from the gas tank to the carborator using nothing but suction In general the primer bulb draws fuel from the tank through the carb and then returns it to the tank. Look for "carb" and "tank" on the primer bulb and make the respective connection. A line should come from the tank to the carb. Another from the carb to the primer. and another back to the tank.
Paint primer is essential for many projects. If primer is sprayed onto the surface before painting, it will allow the paint to better adhere and create an even surface.
No, not a good idea . If that was the case the people who made primer would do it.