Because light goes at the speed: 186,000 miles per second. Also it's the speed of electricity flowing through the wire towards the lightbulb.
A light switch turns on lights because when flipped, it completes a complete circuit.
electrical energy
Yes, flicking the light on and off fast does waste power. Turn the light on only when you need the light to see something in that room. Turn the light off when you leave the room to conserve power.
A switch is fitted to turn off the light whilst the door is closed to avoid wasting electricity and money.
The light is connected in a electrical circuit. The electricity will only pass through the circuit if the circuit is closed. A switch can open and close this circuit by simply not making contact with the next wire so the electricity can not be passed on. When you turn on the switch, the circuit gets closed again and the electricity will run through, so to the light. Because electricity has the speed of light (+-300 000 km/h) it will seems like the electricity reaches the light immediately. Plus the neutral travels through the filement of the bulb and down the switch wire giving an instant closed circuit when switch is closed
Right when you flick the switch to turn on the light the socket connects and the light will automatically turn on.
You should flick the headlight switch after you turn the car on.
After you've charged it up, flick the power switch to turn the unit on.
After you've charged it up, flick the power switch to turn the unit on.
On older computers, flick the switch on the right of the computer, on the newer ones there is a button on the front or side that will turn it off
The fog light switch is on the end of the turn signal switch. Just pull the end of the turn signal switch and the fog lights will come on. (Turn signal switch and fog light switch are one assembly)
That is the valet light ( I believe that is the name of it). It is basically dealing with how you car can be locked and unlocked. There is a switch that should be under it (hidden somewhat) where you can flick to different positions. You can turn it off by putting the key in a certain position and flick the switch. It should be in the manual because I have done it a couple of times but had to follow the instructoins in the manual.
all you have to do is turn it on. the switch is located at the back of the gun. flick the switch to ON and start your automatic mania!
When you turn on a light switch you do not have an open circuit.
Check to see if the switch on top of the steering column is on. Flick the switch in the opposite direction to turn them off. It has a separate switch for it. Hope this helps.
well most people say turn off the light but you could say switch of the light.
This is probably due to a faulty relay switch. The switch needs to be replaced so it will blink in the right timing.