it converts AC line voltage to DC low voltage. at first by transformer it setps-down the voltage then it rectified by bridge rectifier ckt. by this there is rippled DC output is there. then is this fed to filter circuit to filter the ripples and its given to regulator circuit to produce fine and smooth pure DC voltage. nowady SMPS (switch mode power supply) is use rather then older iron core Transformers. SMPS have plenty of advantages over the Linear power adaptor. :))
Some flat irons won't work in Europe, even with an adaptor. The voltage is too high, and if your flat iron doesn't have the voltage conversion number listed on it, then you can't use an adaptor. For instance, on some hair dryers it might say 125-250V. That tells you it will convert itself to use less power when you plug it in to an adaptor. But many flat irons only say 120V, and that tells you it will not be able to be used with an adaptor. I would suggest purchasing a new flat iron, one that has the ability to to use less voltage, or buy one with a European plug. That's what I did when I traveled to Italy.
at Argos, Masterplug 1200mA Multi-Volt Adaptor you will need to set to 9 volts
Because it powers it.
slow depending on signal but you couldn't just plug it in and expect it to work with the ps3 software. instead you would need to get a wifi adaptor or an wifi integrated dongle
nuclear power plant
Yes, but the Kinect will need a separate power adaptor.
Yes, and it will run a little faster on 60 Hertz.
It will work if you can get a UK power adaptor for it, and if you have a NTSC compatible TV, but you will only will be able to play games from the US, not ones from the UK.
No - you would need to buy a suitable adaptor for Australia's power system.
They will work, but you will need a plug adaptor.
Yes, the adaptor can take anything from 100 to 240 v.
We bought 2 Nintendo ds lites in Florida in August and they work fine here but you must buy a new adaptor at the cost of about €12 as the charger/adaptor supplied is not compatible here. You can get the new adaptor/chargers in Smyths or Game. We bought 2 Nintendo ds lites in Florida in August and they work fine here but you must buy a new adaptor at the cost of about €12 as the charger/adaptor supplied is not compatible here. You can get the new adaptor/chargers in Smyths or Game.
You will need an adaptor
Yes provided the adaptor, or the plug that is plugged in, has a 13A fuse.
Digital camcorders either work on battery or on AC power adaptor supplied with the camcorder. The DC output connector of the AC adaptor will connect to DC power input socket on the camcorder body. The location of this socket will depend on the make and model of the camcorder. Some times this socket is covered by a rubber cap which needs to be pulled out before you connect the power. - Neeraj Sharma
You just need an adaptor to plug it in.
no