answersLogoWhite

0


Best Answer

The turbine flow meter translates the mechanical action of the turbine rotating in the liquid flow around an axis into a user-readable rate of flow. The turbine tends to have all the flow traveling around it. The turbine wheel is set in the path of a fluid stream. The flowing fluid impinges on the turbine blades, imparting a force to the blade surface and setting the rotor in motion. When a steady rotation speed has been reached, the speed is proportional to fluid velocity. Turbine flow meters are used for the measurement of natural gas and liquid flow

User Avatar

Wiki User

14y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

11y ago

it works on "CORIOLIS" principle,,,,

as fluid passes through the tube it bends upwards (twists) and ds form creates change in frequency and our density vl measured !!

finally , its all depends on how much our flow passes through the tube ??

This answer is:
User Avatar

User Avatar

Wiki User

9y ago

A flow nozzle meter measures the fluid flow through the nozzle by using Bernoulli's Equation. This equations states that flow velocity is dependent on the pressure, density, flow rate and flow area of a system.

This answer is:
User Avatar

User Avatar

Wiki User

12y ago

the liquid flow meter work on pressure. when flow passes through tube a small ball goes upward due to the force of liquid and it gives data about flow rate

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How the liquid flow meter is working?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Engineering

What is an orifice meter?

A device for measuring the flow of a liquid.


How an analog volt meter works?

The meter movement has a current flowing through a coil. That coil is on a magnet. The electromagnet with the needle moves according to the current flow. That flow is established by resistive ladders inside the meter.


When is the speed of a fluid maximum in a venturi meter?

from the continuity equation A1v1 = A2v2 according to the continuity equation as the area decreases the velocity of the flow of the liquid increases and hence maximum velocity can be obtained at its throat


What is the Working principle of taung tester clamp meter?

CLAMP METER WORKS WITH THE PRINCIPLE OF HALL EFFECT..


What effect if any does connecting an ammeter in series with a resistor in a circuit have on the current through resistor?

The Amp meter was design to allow current flow through the meter to measure with a minimal alteration to the original circuit. That is the ideal world, in reality the meter has some resistance and will lower the current flow. The multiple current setting on most meter will reduce the effects caused by the meter but you must be careful not to damage the meter by reading to high for the setting.

Related questions

What is the purpose of a flow meter?

The purpose of a flow meter is to measure the flow of either air or water. They allow one to measure the total volume of air or liquid flow and the rate of the flow.


What does a flow meter control?

A flow meter is a device that measures the energy flow of either a liquid or a gas. Like if you have nitrous oxide in a tank and you want to know how much is left after you use some, a flow meter would tell you.


Why would the flow meter stop working on the swimming pool?

Possibly a grain of sand or debris in the flow tube.


What are the major disadvantages of thermal mass flowmeters?

There are no major disadvantages of thermal mass flow meter as compared to its advantages. But cons of thermal mass flow meter includes: Not effective in Vibrations and turbulence You should install flow straightener with flow meter Periodic cleaning needed


What is the symbol of Flow meter?

THE SYMBOL FOR Flow Meter is : FI as Flow Indicator


What is Symbol for flow meter?

The above is the symbol of flow meter.


How would one recalibrate a flow meter?

One can recalibrate a flow meter by having a company or owning a flow meter supplier or using a flow meter lab. No matter what type of flow meter they need to be checked to see if they need to be recalibrated regularly.


Is rota meter a mass flow meter?

rota meter


How much does a flow meter cost?

I believe it depends on what kind of flow meter you are looking for. They can range from 19.99 and go up. The more expecive it gets the better the flow meter.


Why is a liquid able flow?

a liquid is able to flow because its freely moving particles allow liquid to flow from place to place


What does a flowmeter measure?

A flowmeter is an instrument that is used to designed the rate of flow for a liquid or a substance such as a gas. The measure of the substance is by the volume of its weight. A flow meter can measure many substances that otherwise would not be measurable.


What is an orifice meter?

A device for measuring the flow of a liquid.