answersLogoWhite

0

A rotary meter measures the flow of gas or liquid by using a rotating mechanism. As the fluid enters the meter, it drives a set of vanes or lobes that rotate around a central axis. The volume of fluid passing through the meter is calculated based on the number of rotations and the displacement of the vanes, providing an accurate measurement of flow rate. This type of meter is known for its reliability and precision in various industrial applications.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

How does a rotary compressor work?

Same way a non rotary compressor works


How does a rotary pump work?

how does a rotatory pump work


How does a rotary engine work?

pretty good explanation here...http://auto.howstuffworks.com/rotary-engine.htm


Under what conditions would I use a rotary seal?

A rotary seal would be used in mill work. You will need trainign in order to operate a rotary seal.


What do I use a rotary table for?

Rotary tables have several commercial applications. They are most commonly used fro drilling,or in mill work.


How does rotary phase converter work?

A rotary phase converter is a device that changes single phase electrical power into multiple phase electrical power.


How can wire up the voltmeter to measure 3 phase supply without rotary switch?

There are only two ways this can be accomplished. The most economical way to measure three phase voltages is with one meter and a rotary switch, that has an off position, to connect the one meter to each of the three phases one at a time. The other approach is to have three volt meters connected to each phase to measure each phase individually. With the three meter approach you will still need a switch in each meter so that the meter can be taken out of the circuit when no reading is needed.


How does rotary thermometer work?

God knows. if u al don know that .


Will the rotary garden cultivator work in a garden bed that has 1/2" rocks?

The rotary garden cultivator can turn soil with a few rocks in it. If your area is very rocky or hard, a rear-tine cultivator will work best.


Can you put a rotary engine in a jeep wrangler?

you can put anything you want in there rotary , turbine , squirrels on a tread mill , getting it to bolt up and work is another story


How does the rotary encoder work?

A rotary encoder is a type of position sensor which is used for defining the angular position of a rotating shaft. It generates an electrical signal, either equivalent or digital, according to the rotational movement. There are numerous types of rotary encoders like: absolute rotary encoder, incremental rotary encoder Light Duty Incremental Encoders and many other. These encoders are categorized by either Output Signal or Sensing Technology.


What is the difference between rotary and tropical rotary compressors?

Tropicalized Rotary means