it is basically used for machining..
Milling in a lathe can be two things:A cutter is gripped in the chuck and a workpiece the the tool post. The work piece is then milled by using the feed on the lathe. Although it has been done, it is an unconventional method and is not recommended.A 3-in-1 lathe with a milling attachment as part of the machine used for milling a work piece.
Lathe specifications· Distance between centers· Swing over the bed· Swing over the cross slide· Horse power of the motor· Number of speeds
The centre lathe has only one coaxial tool, whereas the capstan has a rotating multi tool station with indexer and clutch.
non- examples of feed in lathe machine?
The ones that i use at college and work are a milling machine, a lathe, a drill, and a saw but i think the main ones (In mechanical engineering) are the Milling Machine and the Lathe.
# Capstan (nautical), rotating machine used to control or apply force to another element. # Capstan (tape recorder), rotating spindles used to move recording tape. # Capstan (cigarette), a brand of British cigarette
There is no difference between a turning machine and a lathe. They are two names for the same kind of machine
One advantage of a lathe machine is that it can perform very detailed and intricate designs. One disadvantage of a lathe machine is that these machines are more expensive than other types of machines used to produce this type of work.
what is lathe machine in short answer
difference between lathe and drill machine doing full on piece of metal
difference between lathe and drill machine doing full on piece of metal
Vertical milling machine is for cutting large pieces. The lathe cutting tool motion is perpendicular to the ground. They are said to Karosl lathe.