Changing the temperature increases the change in energy.
i need the answer
Thermoelectric devices create electric voltage from temperature differences.
Temperature is measured in degrees, voltage is measured in volts. They are different physical concepts.
Light intensity affects voltage because the higher the intensity of light, the more volts are produced. It works exactly the same way in the case of: the lower the light intensity the less volts that are produced.
Faraday's Law.
what determines the amount of voltage produced by a voltaic cell?
analog signal
If you mean sensor, a sensor is a device that changes based on some phenomenon and this change is used to measure the change in the phenomenon.For example, assume a device produces a voltage and the amount of that voltage depends on the temperature of the device. It can be used as a sensor for temperature. Assume you put the device in water and another device measures the voltage produced by the sensor. Based on the voltage of the sensor it can display the temperature of the water. So, in this example, the sensor senses the temperature of the water.
If you mean sensor, a sensor is a device that changes based on some phenomenon and this change is used to measure the change in the phenomenon.For example, assume a device produces a voltage and the amount of that voltage depends on the temperature of the device. It can be used as a sensor for temperature. Assume you put the device in water and another device measures the voltage produced by the sensor. Based on the voltage of the sensor it can display the temperature of the water. So, in this example, the sensor senses the temperature of the water.
Thermocouples are two junctions of two dissimilar metal conductors. One junction is the sensing junction and the other is the reference junction. The voltage between the two junctions depends on the temperature difference between the junctions (Seebeck effect). The voltage can be measured and the temperature difference determined based on known readings of the voltage produced by the metals. If the temperature of the reference junction is known, then the temperature of the sensing junction can be calculated.
Analog Signal. If I helped you out make sure to check out my Youtube. GomezManor
Resistance is affected by the length, cross-sectional area, and resistivity of the conductor. The resistivity, in turn, is affected by temperature. So only by changing one of these four factors will the resistance of a conductor change. Changing voltage will have no affect upon the conductor's resistance.
Temperature coefficient of the PN intersection voltage to balance the temperature coefficient of the warm voltage.
by changing load its terminal voltage changes.
Less current.
With higher temperature, low voltage
no it is not possibleAnswerYes, by changing the voltage OR the resistance.